User Manual

INDEX

CONTENTS

The flow chart shown below provides printing overview.

Reference: For more information on printing, see Basic Printing.

* The multi-bypass tray can be used on the AL-1225, and the single bypass can be used on the

AL-1216. For the procedures for loading paper in each type of tray, see "LOADING PAPER" in

the Operation Manual.

Caution

! When the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting

printing.

! Ensure printing has been completed before turning the power off. Do not remove the power cord before turning

the unit off.

When printing from paper tray or multi-bypass tray

* When printing from single bypass*

Prepare the document you intend to print

Send print data from your computer

Printing

Exit printing

Load a single sheet of paper into the single bypass

Reference:

For more detail, refer to the "BYPASS FEED (including special paper)" in

the Operation Manual.

Open the printer driver setup screen and set the print preferences

Reference:

Printer Driver Settings, Printing a Watermark, Fitting the Printed Image to the Paper,

Printing Multiple Pages on One Page

Printing Overview