Service manual

AL-1661CS SPECIFICATIONS 2 - 5
Send functions Document scan
function
Document size Max. document width Inch series: 8.5"
AB series: 210mm
Max. document length 500mm (Only form R-SPF, with user support)
Send document size AB series: A4
Inch series: Letter (8.5 x 11)/Legal (8.5 x 14) (Default:
Letter (8.5 x 11))
Document size
specification
Yes
Half-tone reproduction Half-tone 256 gradations
Resolution selection Manual 5 steps
Standard/Fine/Super Fine/Fine + Half-tone/Super
Fine + Half-tone (Default: Standard)
Scan density select
function
Density select Light/Medium/Dark
Scan resolution select
function
Selectable image
quality mode
Scan density
Resolution select Standard: 8dot x 3.85 line/mm
Fine: 8dot x 7.7 line/mm
Super Fine: 8dot x 15.4 line/mm
Half-tone: Scan in 256 gradations
Document table scan
(OC send) function
Book document scan/send function from the
document table (OC). In one send job, the send
document size is fixed.
Send document
information adding
function
Sender registration/
send function
Sender telephone
number
20 digits
Sender registration
name
40 characters
Send header function Header display
content
Sender number registered in sender registration/
Sender name/ Send date and time/ page
Page counter function Adding position Top right (The right edge)
Adding form P. XXX (Max. 999)
Cover adding function Display items • Date and time
• Destination name (Max. 20 characters)
• Destination number (Max. 40 digits)
• Sender name (Max. 20 characters)
• Sender number (Max. 20 digits)
• Send quantity (3 digits)
• Send message (When send message adding
function is used)
Send message adding
function
Fixed message NO MESSAGE/CONFIDENTIAL/PLS. DISTRIBUTE/
URGENT/PLS. CALL BACK/IMPORTANT
Index function Yes (Max. 10 kinds in printable area)
Basic send functions Direct send function Yes
Memory send function Send form
Number of items of
send reservation
• Send reservation
• Time specifying send
• Group send
• Serial broadcast
Max. 52 items (excluding redial)
Group send and broadcast are treated as one item.
Operation when
memory full
• Document scan stop
• Memory full display → Job continuation check
• Job continuation: Scanned document data are
sent.
• Job stop: Scanned document data are deleted.
• In either case, document is held in SPF and not
discharged.
Quick online send
function
Valid when memory mode is ON. Scan of send
document data and send are performed together.
Auto resend function When busy tone
detected
Redial is performed according to the setting of
"Number/interval of redial when busy."
When no response
(CED/ FSK signal are
not detected)
Redial is performed according to the setting of
"Number/ interval of resend in communication error."
Communication error
Long document send
function
Supports up to 500mm. When this length is
exceeded, "PAPER JAM" occurs.
Large item Middle item Small item Sub item Specifications