Service manual

AL-1661CS TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 33
66 11 300bps signal send (Max.
value)
[Function]
Use to set the 300bps signal send (Max. value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation]
12 300bps signal send (Soft
SW set value)
[Function]
Use to set the 300bps signal send (Soft SW set value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation]
Main
code
Sub
code
Contents Details of function/operation
1) Initial display
2) [←/→] or after 2sec
Every time when [→] key is pressed, the second line is changed in the sequence of No. 1 → 2 →
3 → 4 → 5 → 6 → 1.
When [←] key is pressed, the sequence is reversed.
∗ [CLEAR] key: FAX control is terminated.
3) [ENTER] key
∗ [CLEAR] key: Returns to "1) Initial display".
SELECT SIGNAL
PRESS ←, →
SELECT SIGNAL (1-6)
1:NO SIGNAL
..... SELECT SIGNAL (1-6)
6:00001
OUTPUTING SIGNAL MAX
PRESS CLEAR TO STOP
1) Initial display
2) [←/→] or after 2sec
Every time when [→] key is pressed, the second line is changed in the sequence of No. 1 → 2 →
3 → 4 → 5 → 6 → 1.
When [←] key is pressed, the sequence is reversed.
∗ [CLEAR] key: FAX control is terminated.
3) [ENTER] key
∗ [CLEAR] key: Returns to "1) Initial display".
SELECT SIGNAL
PRESS ←, →
SELECT SIGNAL (1-6)
1:NO SIGNAL
..... SELECT SIGNAL (1-6)
6:00001
OUTPUTING SIGNAL SSW
PRESS CLEAR TO STOP