User Manual

37
REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING
3
To change the reduction/enlargement ratio option, keep pressing
the (or ) "ARROW" button, and set the reduction/enlargement
ratio to the desired setting (25% - 400%).
4
Press the "ENTER" button.
A checkmark ( ) will appear, indicating the selected value. After displaying the
selected value for one second, the display will return to the ready message.
5
After the number of copies entry, and selecting the colour mode
and copy quality settings, press the "START" button ( ).
You get copies with the selected reduction/enlargement ratio preference.
To make quick zoom ratio adjustments
1
Press the "ZOOM" button, and then keep pressing the (or )
"ARROW" buttons until the preset ratio which is near to the
desired value is displayed.
2
Keep pressing the (or ) "ARROW" buttons to reduce/
enlarge the zoom ratio to the desired value.
SETTING UP THE PREFERENCES FOR
COPIED IMAGES
Setting brightness
Follow the steps shown below to make the image lighter or darker.
1
Set the original on the original table and make sure that the desired
size of paper is set in any of the paper trays.
See page 33 to confirm the paper sizes in the unit.
2
Press the "BRIGHTNESS/INTENSITY" button and keep pressing
the (or ) "ARROW" button until "Brightness" is shown on
the first line of the display panel.
5.Repeat Image
30% - +
5.Repeat Image
30% - +
Ready to Copy
R 30% A4 0
1.Brightness
3.Normal