User Manual

35
REDUCING/ENLARGING THE IMAGE SIZE FOR
COPYING
The image size can be reduced/enlarged for copying between 25% and 400%. You can
also use useful functions such as "Poster", "Repeat Image", and "Mirror" functions.
1
Set the original on the original table and make sure that the desired
size of paper is set in any of the paper trays.
To confirm the selected paper size, press the "PAPER SELECT" button on the
operation panel, and then keep pressing the (or ) "ARROW" button until the
setting name "Paper Size" setting appears on the first line of the display panel. The
specified paper size will appear on the second line. To change the paper size
setting, refer to the steps on page 33.
2
Press the "ZOOM" button, and then keep pressing the (or )
"ARROW" button until the desired option item is displayed.
The default settings of reducing/enlarging operation are shown below.
* When these values are changed using (or ) "ARROW" button, setting the name will
be changed to "Variable".
Zoom setting Default setting
1. Variable (Default setting) 100%
2. Zoom *91%
3. AutoFit
Displays the paper size currently selected. (Reduces/
Enlarges the size of the output image to fit the printable
area of the paper supplied to the unit.)
4. Poster
400% (Enlarges the size of the output image, and divides it
when copying)
5. Repeat Image 100% (Copies multiple pages onto a single page.)
6. Mirror 100% (Copies the original as mirror image.)
7. Custom 50%
8. A4 to A5 (AB type) *70%
These values are available when A4 sized
paper is selected as default.
9. B5 to A5 (AB type) *81%
10. B5 to A4 (AB type) *115%
11. A5 to A4 (AB type) *141%
8. Zoom (Inches) *64%
These values are available when 8.5" x 11"
sized paper is selected as default.
9. Zoom (Inches)
*78%
10. 95 percent (Inches) *95%
11. 5.5x8.5 8.5x11 (Inches)
*129%
12. Double Size *200%
! Reduction/enlargement copy ratios cannot be specified when "AutoFit" is
selected.
! The "Poster" setting is unavailable when copying from the bypass tray.
5.Repeat Image
100% - +