User Manual

21
SETTING UP FOR
Windows
INSTALLING THE PRINTER DRIVER
Installing onto Windows Me (USB interface)
1
Make sure that the printer is connected to your computer by
USB cable.
2
Turn on the printer, and then turn on your computer.
"Add New Hardware Wizard" window will appear.
3
Insert the supplied CD-ROM into your CD-ROM drive.
4
Check the radio button for "Automatic search for a better driver
(recommended)", and then click the "Next" button.
5
Click the "Finish" button.
"Add New Hardware Wizard" window will close.
6
Double-click "My Computer" ( ), and then double-click the CD-
ROM ( ) icon.
7
Double-click the "Setup" ( ) icon.
8
Check if the appropriate language has been selected, and then
click the "OK" button.
Normally, the correct language is selected automatically.
9
After confirming the message in the "Welcome" window, click
the "Next" button.
10
Be sure to read the descriptions in the "ReadMe" window, and
then click the "Next" button.
If this window does not appear, refer to "Failed to Install the Printer Driver (USB
Interface)" in "Troubleshooting" of the online manual.