User Manual

7
SETTING UP THE
PRINTER
PART NAMES AND FUNCTIONS
HOW TO SHUT OFF POWER
1
Turn off the power by pressing the power button and ensure
that the power lamp is extinguished.
2
Unplug the power cord from the outlet.
z Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
z To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.
Bypass tray
Use this tray to print on a single page.
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)
Power socket
Plug the power cord *
into the socket.
Parallel interface
connector (36pin)
Use a parallel interface cable
(IEEE1284) to connect the
printer to your computer.
USB interface connector (B type)
Use a USB cable to connect the
printer to your computer. It is possible
to insert the cable after the printer has
been switched on.
Jam cover
Open this cover to remove
jammed paper.
Rear Side
* When the power cord is connected to the outlet, power for the printer is turned on automatically.