User Manual

6
PART NAMES AND FUNCTIONS
The following illustration lists the part names and function. Before operating, it is advisable
to familiarise yourself with the printer.
The illustration below shows the printer with all the parts installed.
Print head latch
Secures the print head into
position for operation.
Cyan ink tank
Yellow ink tank
Magenta ink tank
Photo cyan ink tank
Photo magenta ink tank
Photo black ink tank
Carriage
Photo print head
Applies ink to the
paper.
Front cover
Open this cover to
change the ink tanks
or print heads.
Output tray
The document is
deposited onto the tray
after printing. Extend
the tray when printing
long documents.
Paper tray
Adjustable to suit a
variety of paper sizes.
Paper button
Press this button after solving a
paper jam or empty.
Depressing the button for a few
seconds will activate the test
print.
Paper knob
When printing onto an envelope
or thick paper, adjust the knob
to setting.
(Return the knob to
its original setting after printing.)
Power button
Press to turn the printer on
or off.
Ink lamp
The light blinks when the ink
is empty, or the ink tank is
not inserted correctly.
Paper lamp
The light blinks when the
printer is out of paper, or a
misfeed has occurred.
Power lamp
The indicator is lit when the
printer is ready to print.
*
If the printer has been kept
idle for more than 20 minutes,
the power will go off and so
will the power lamp.
The printer can be restarted
when the power button is
pressed, or any print job is
sent from your computer.
Front Side
Internal Part
Colour print head
Applies ink to the paper.