User Manual

35
SETTING UP FOR
Windows
HOW TO USE THE ONLINE MANUAL
Installing Acrobat Reader
To install Acrobat Reader, about 10MB of hard disk space is required.
1
Turn on your computer.
2
Insert the CD-ROM into the CD-ROM drive.
3
Click the "Start" button, and select "Run".
4
Type "D:\ACROBAT\AR405ENG.EXE" and click the "OK" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
Follow the on-screen instructions to install Acrobat Reader.
HOW TO PRINT
1
Make sure that the paper of the desired size and type is loaded
in the tray.
2
Open the document you intend to print, and select "Print" from
the application's "File" menu.
3
Verify the "Printer Name" is set to "SHARP AJ-2100" and click
the "Properties" button.
4
Specify the print settings including the number of copies,
media type, and print quality, and then click the "OK" button to
start printing.
For more information on print settings, refer to the online manual.
BONUS SOFTWARE
To install MGI PhotoSuite III SE on the supplied CD-ROM, please refer to the following procedures.
After turning on your computer, insert the CD-ROM.
1
Click the "Start" button, and select "Run".
2
Type "D:\MGI\PS3\SETUP.EXE" and click the "OK" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
Follow the on-screen instructions to install PhotoSuite III SE.