User Manual

24
INSTALLING THE PRINTER DRIVER
Installing onto Windows 95
1
Make sure that the printer is connected to your computer.
2
Turn on the printer, and then turn on your computer.
"Update Device Driver Wizard" or "New Hardware Found" window will appear.
If the "Update Device Driver Wizard" window appears, click the "Next"
button and proceed to step 3.
If the "New Hardware Found" window appears, perform the following
steps and proceed to step 6.
1) Check the radio button for "Driver from disk provided by hardware manufacturer",
and click the "OK" button.
2)
Insert the supplied CD-ROM into your CD-ROM drive, type "D:\ENGLISH\WIN9X",
and then click the "OK" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
Go to step 6.
If neither the "Update Device Driver Wizard" window nor the "New Hardware
Found" window appears, refer to "Installing onto Windows 95 / 98" (page 26).