User Manual

33
SETTING UP FOR
Windows
ALIGNING THE PRINT HEAD
2) Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the number under the pattern sample,
in which is located the closest to the centre of the two horizontal lines.
3) Select pattern samples for "Pattern C" and "Pattern D" respectively.
Look at the chart C and D on your test chart. Select the numbers under the pattern
samples, which have the straightest lines.
8
Click the "OK" button in the "Align print head" dialog box.
The print head will align itself.
z If you cannot find any satisfactory pattern sample for each of "Pattern A" to
"Pattern D" settings, select the best ones among the printed pattern samples,
and then go back to step 5. (For Macintosh, go back to step 3 on page 38.)
z The printer cannot perform other operations while aligning the print head.
-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8
Example:
-6 +8
B
-6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6
-6
Example:
+1
cracked line straight line
C or D