User Manual

22
INSTALLING THE PRINTER DRIVER
Installing onto Windows 98 (Parallel interface) / 2000
1
Make sure that the printer is connected to your computer.
2
Turn on the printer, and then turn on your computer.
On this step, "Add New Hardware Wizard" on Windows 98 or "Found New
Hardware Wizard" on Windows 2000 will appear.
3
Click the "Next" button.
4
Insert the supplied CD-ROM into your CD-ROM drive.
5
Check the radio button for "Search for the best driver for your
device (recommended)", and then click the "Next" button.
On Windows 2000, check the radio button for "Search for a suitable driver for my
device (recommended)", and then click the "Next" button.
6
Select the "Specify a location:", type "D:\ENGLISH\WIN9X", and
then click the "Next" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
z The screen images in this section are those of Windows 98.
z The contents of each screen image are those of the AJ-1800.
If neither of these screens will appear on your computer, refer to either of "Installing
onto Windows 95 / 98" (page 26) or "Installing onto Windows 2000 / NT4.0"(page 29)
according to your operating system.