Specifications
MX-3610N SIMULATION 5 – 108
This must be set to the default unless any change is specially required.
When the adjustment value is changed greatly from the initial value, an image quality trouble may occur.
48
48-1
Purpose
Adjustment
Function (Purpose)
Used to adjust the scan image magnifica-
tion ratio (in the main scanning direction
and the sub scanning direction).
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the adjustment value is increased, the image magnification
ratio is increased.
A change of "1" in the adjustment value of item A, C, or E corre-
sponds to a change of about 0.02% in the copy magnification ratio.
A change of "1" in the adjustment value of item B, D, or F corre-
sponds to a change of about 0.1% in the copy magnification ratio.
[RSPF]
48-5
Purpose
Adjustment
Function (Purpose)
Used to correction the scan image magnifi-
cation ratio (in the sub scanning direction).
Section
Scanner section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the image magnification ratio in the sub scanning direction is
adjusted with SIM48-1, and a different magnification ratio is speci-
fied, and the image magnification ratio is not satisfactory, perform
this adjustment.
When there is an error in the image magnification ratio in reduction,
change the adjustment value in the high speed mode. When there
is an error in the image magnification ratio in enlargement, change
the adjustment value in the low speed mode.
Item Display Content Description
Setting
range
Default
value
A SEGMENT PARAM COMMON Area separation setting select 0: Other than image send mode black
text emphasis (simple, high
compression)
1: Image send mode black text
emphasis (simple, high compression)
0 - 1 0
SPECIAL
B BG: JPEG QUALITY LV [COL: COMPACT] JPEG recompression level adjustment
[Color: High compression mode]
The JPEG compression ratio of the
background layer is selected.
0: Low
1: Middle
2: High
0 - 2 1
C BG: JPEG QUALITY LV [COL: ULTRA FINE] JPEG recompression level adjustment
[Color: Ultra fine mode]
0 - 2 1
D BG: JPEG QUALITY LV [GRY: COMPACT] JPEG recompression level adjustment
[Gray: High compression mode]
0 - 2 1
E BG: JPEG QUALITY LV [GRY: ULTRA FINE] JPEG recompression level adjustment
[Gray: Ultra fine mode]
0 - 2 1
F FG: TARGET AREA TYPE0 Front ground extraction area select 0: type0 0 - 2 0
TYPE1 1: type1
TYPE2 2: type2
G FG: TEXT DENSITY [COL] Front ground black text density
adjustment [Color]
The black text density in the front ground
layer is changed.
0: Dark - 5: Default - 10: Light
0 - 10 5
H FG: TEXT DENSITY [GRY] Front ground black text density
adjustment [Gray]
0 - 10 5
I ULTRA FINE MODE OFF High compression/Ultra Fine mode
select
0: High compression mode
1: Ultra fine mode
0 - 1 0
Item/Display Content
Setting
range
Default
value
A CCD (MAIN) SCAN main scanning
magnification ratio adjustment
(CCD)
1 - 99 50
B CCD (SUB) SCAN sub scanning
magnification ratio adjustment
(CCD)
1 - 99 50
C SPF (MAIN) RSPF document front surface
magnification ratio adjustment
(Main scan)
1 - 99 50
D SPF (SUB) RSPF document front surface
magnification ratio adjustment
(Sub scan)
1 - 99 50
E SPFB (MAIN) RSPF document back surface
magnification ratio adjustment
(Main scan)
1 - 99 50
F SPFB (SUB) RSPF document back surface
magnification ratio adjustment
(Sub scan)
1 - 99 50
Item/Display Content
Setting
range
Default
value
A MR (HI) Scanner motor (High speed) 1 - 99 50
B MR(MID) Scanner motor (Reference speed) 1 - 99 50
C MR(LO) Scanner motor (Low speed) 1 - 99 50
D SPF(HI) Document feed (SPF) motor
(High speed)
1 - 99 50
E SPF(MID) Document feed (SPF) motor
(Reference speed)
1 - 99 50
Item/Display Content
Setting
range
Default
value