Specifications
MX-3610N SIMULATION 5 – 87
46-8
Purpose
Adjustment (Color scanner mode)
Function (Purpose)
Used to adjust the image send mode color
balance RGB.
Section
Operation/Procedure
1) Select an adjustment target with [R] [G] [B] keys on the touch
panel.
2) Select an adjustment target item with scroll key on the touch
panel.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
The color balance can be adjusted separately for the low density
area and the high density area.
When the adjustment value is increased, the image density of the
target color is increased, and vice versa.
46-9
Purpose
Adjustment (RSPF mode)
Function (Purpose)
Used to adjust the scan image density.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
3) Press [OK] key. (The set value is saved.)
This adjustment result affects the image send mode, the copy
mode, and the fax mode.
When the adjustment value is increased, the image density is
increased, and vice versa.
[RSPF]
46-10
Purpose
Adjustment
Function (Purpose)
Used to adjust the copy color balance and
the gamma (for each color copy mode).
Section
Operation/Procedure
1) Select an adjustment target mode with the touch panel key.
2) Select an adjustment target color with [K][C][M][Y] keys on the
touch panel.
3) Select an adjustment target item with scroll key on the touch
panel.
4) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
5) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density is
increased, and vice versa.
46-16
Purpose
Adjustment
Function (Purpose)
Used to adjust the monochrome copy den-
sity and the gamma (for each monochrome
copy mode).
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
3) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density is
increased, and vice versa.
Item/Display Content
Default
value
A LOW DENSITY POINT Low density correction amount 50
B HIGH DENSITY POINT High density correction amount 50
Item/Display Content
Setting
range
Default
value
A COPY : LOW RSPF copy mode exposure
adjustment (Low density side)
1 - 99 48
B SCAN : LOW RSPF scanner mode exposure
adjustment (Low density side)
1 - 99 48
C FAX : LOW RSPF FAX mode exposure
adjustment (Low density side)
1 - 99 48
D COPY : HIGH RSPF copy mode exposure
adjustment (High density side)
1 - 99 53
E SCAN : HIGH RSPF scanner mode exposure
adjustment (Low density side)
1 - 99 53
F FAX : HIGH RSPF FAX mode exposure
adjustment (high density)
1 - 99 53
TEXT Text
TEXT/PRT PHOTO Text/Printed Photo
PRINTED PHOTO Printed Photo
PHOTO + TEXT/PHOTO Photograph + Text/Printed Photo
MAP Map
LIGHT Light document
COPY ORG Copy document
Item/Display
Density level
(Point)
Setting range Default value
A POINT1 Point 1 1 - 999 500
B POINT2 Point 2 1 - 999 500
C POINT3 Point 3 1 - 999 500
D POINT4 Point 4 1 - 999 500
E POINT5 Point 5 1 - 999 500
F POINT6 Point 6 1 - 999 500
G POINT7 Point 7 1 - 999 500
H POINT8 Point 8 1 - 999 500
I POINT9 Point 9 1 - 999 500
J POINT10 Point 10 1 - 999 500
K POINT11 Point 11 1 - 999 500
L POINT12 Point 12 1 - 999 500
M POINT13 Point 13 1 - 999 500
N POINT14 Point 14 1 - 999 500
O POINT15 Point 15 1 - 999 500
P POINT16 Point 16 1 - 999 500
Q POINT17 Point 17 1 - 999 500