Specifications

MX-3610N TROUBLESHOOTING 6 – 48
FSTPLJ Staple JAM Driving the staple
motor is started.
FSHS ON is not detected within the
specified time after detection of
FSHS OFF during stapling
operation, and FSHS ON is
detected by reverse rotation of the
staple motor after stapling
operation is stopped.
400 [msec] 200 [msec] 600 [msec]
Staple extending
operation is started.
Staple extending cannot be
executed by execution of staple
feeding by the specified number of
times (9 times) during staple
extending operation.
9 times
Driving the saddle
staple motor is started.
FSSHS ON is not detected within
the specified time after detection of
FSSHS OFF during stapling
operation, and FSSHS ON is
detected by reverse rotation of the
staple motor after stapling
operation is stopped.
480 [msec] 240 [msec] 720 [msec]
Saddle staple
extending operation is
started.
Staple extending cannot be
executed by execution of staple
feeding by the specified number of
times (14 times) during staple
extending operation.
14 times
FPNCHJ Punch JAM Punch motor stop FPCHPS does not turn ON after
punching operation.
FPCHPS OFF
FIN_TIME Finisher paper early
reaching JAM
Paper exit command
of the preceding paper
The paper exit command of the
next paper is received at the timing
earlier than the specified paper
interval.
Specified paper
interval time
150 [msec] (Specified
paper interval
time) - 150)
[msec]
FIN_PAOF Paper attribute data
reception overflow
Paper information
data command is
received.
Paper information data of more
than allowable buffer (16 sheets)
are received.
16 sheets
FPATPD_S Saddle transport
remaining JAM
Transport operation is
started after folding
operation.
FSATPD does not turn OFF within
the specified time.
(Paper length/
2 – 26.2) [mm]
(Paper length/
2 – 26.2) [mm]
(Paper length/
2 – 26.2) x 2
[mm]
FPPD3_N Saddle paper exit not-
reached JAM
Thrusting operation is
started.
FPPD3 does not turn ON within the
specified time.
66.9 [mm] 66.9 [mm] 133.8 [mm]
FPPD3_S Saddle paper exit
remaining JAM
Transport operation is
started after folding
operation.
FPPD3 does not turn OFF within
the specified time.
(Paper length/
2 – 26.2) [mm]
(Paper length/
2 – 26.2) [mm]
(Paper length/
2 – 26.2) x 2
[mm]
FSSMJ Stapler shift motor JAM Driving the stapler
shift motor is started.
Change from FSSHPS ON to OFF
is not detected within the specified
time during the stapler shift
operation.
1434 [msec] 1434 [msec] 2868 [msec]
Change from FSSHPS OFF to ON
is not detected within the specified
time during the stapler shift
operation.
2085 [msec] 2085 [msec] 4170 [msec]
Change from FSSSHPS ON to
OFF is not detected within the
specified time during the stapler
shift operation.
401 [msec] 401 [msec] 802 [msec]
Change from FSSSHPS OFF to
ON is not detected within the
specified time during the stapler
shift operation.
3179 [msec] 3179 [msec] 6358 [msec]
Change from FSSSW2 ON to OFF
is not detected within the specified
time during the stapler shift
operation.
138 - 503
[msec]
138 - 503
[msec]
276 - 1006
[msec]
Change from FSSSW2 OFF to ON
is not detected within the specified
time during the stapler shift
operation.
291 - 803
[msec]
291 - 803
[
msec]
582 - 1606
[msec]
FDRLMJ Paper exit roller lift motor
JAM
Driving the finisher
paper exit roller lift
motor is started.
Change from FDRHS ON to OFF is
not detected within the specified
time during the paper exit roller lift
operation.
176 [msec] 176 [msec] 352 [msec]
Change from FDRHS OFF to ON is
not detected within the specified
time during the paper exit roller lift
operation.
235 [msec] 235 [msec] 470 [msec]
FSDMJ Saddle motor JAM JAM which is not detected yet
JAM code JAM content
JAM detection method
Basic distance
(A) [mm]
JAM margin
distance (B)
[mm]
JAM detection
distance (A+B)
[mm]
JAM detection start
trigger
JAM judgment condition