Specifications

MX-3610N SIMULATION 5 – 131
62-8
Purpose
Data clear
Function (Purpose)
Used to format the hard disk/SD Card.
(HDD: Excluding the Operation Manual, the
watermark data, and the system area) (SD
Card: User data)
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to execute the hard disk format.
When the operation is completed, [EXECUTE] key returns to the
normal display.
* When the HDD formatting (except for the system area) is not
completed normally, "HDD FORMAT (EXCEPT SYSTEM AREA)
NG" is displayed.
62-10
Purpose
Data clear
Function (Purpose)
Used to clear the job completion list data.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to delete the job log data.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-11
Purpose
Data clear
Function (Purpose)
Used to delete the document filing data.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to delete the document filing data.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-12
Purpose
Setting
Function (Purpose)
Used to set Enable/Disable of auto format
in a hard disk trouble.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value is saved.
When it is set to Enable, if a read error of HDD occurs in the system
data storage area (FAX/device cloning data, etc.), only the system
data storage area is cleared.
62-13
Purpose
Data clear
Function (Purpose)
Used to format the hard disk. (Operation
Manual, watermark data only)
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The operation manual data are deleted.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-14
Purpose
Data clear
Function (Purpose)
Used to delete the document filing manage-
ment data.
Section
HDD
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The document filing management data are cleared.
At the same time, the job log data are also cleared.
This simulation is executed in the following trouble cases.
* The document filing function does not work normally.
* The job log is not recorded normally.
This simulation may not function with some firmware versions.
In such a case, the firmware must be upgraded to the latest ver-
sion.
62-15
Purpose
Data conversion
Function (Purpose)
Used to convert the setting data for docu-
ment filing reprint.
Section
MFP
Operation/Procedure
Press [EXECUTE] key.
Conversion of the setting data for document filing reprint is started.
When the procedure is completed, "EXECUTE" button returns to
the normal display.
Description:
The document filing data made in a machine of the 26cpm/31cpm/
36 cpm machine with the ICU firmware version 00.28.A1 or before
cannot be reprinted under the environment of the ICU firmware ver-
sion 01.00.A1 or later.
To solve this problem, use this simulation to convert the document
filing data made under the older firmware into those for the new
firmware, enabling reprinting.
Be sure to execute this simulation when the ICU firmware version is
upgraded from 00.28.A1 or before to 01.00.A1 or later.
A 0 Enable
1 Disable (Default)