Specifications

MX-3610N SIMULATION 5 – 130
61-4
Purpose
Adjustment
Function (Purpose)
Used to print the print image skew adjust-
ment pattern. (LSU unit)
Section
Operation/Procedure
1) Select a target item with scroll key on the touch panel.
2) Enter the print conditions setting value with 10-key.
3) Press [EXECUTE] key.
The print image skew adjustment pattern is printed.
62
62-1
Purpose
Data clear
Function (Purpose)
Used to format the hard disk/SD Card.
(HDD: Excluding the Operation manual and
the watermark data) (SD Card: User data)
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to execute the HDD/SD Card format.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-2
Purpose
Operation test/check
Function (Purpose)
Used to check read/write of the hard disk
(partial).
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
62-3
Purpose
Operation test/check
Function (Purpose)
Used to check read/write of the hard disk
(all areas).
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Read/write operations are performed.
62-6
Purpose
Operation test/check
Function (Purpose)
Used to perform the self diagnostics of the
hard disk.
Section
Operation/Procedure
1) Select the self diag area.
2) Press [EXECUTE] key.
The self diag operation is performed.
E7-03 error occurs. If there may be a trouble in the HDD, use this
simulation to cheek the HDD.
When the operation is completed, [EXECUTE] key returns to the
normal display.
Normal completion  "OK (RESULT:0)" is displayed.
Abnormal end  "NG (RESULT: Other than 0)" is displayed.
* If the simulation cannot be executed or terminated abnormally for
some reason, "ERROR" is displayed on the corresponding sec-
tion.
62-7
Purpose
Operation test/check
Function (Purpose)
Used to print the hard disk self diagnostics
error log.
Section
Operation/Procedure
1) Press [EXECUTE] key.
ERROR LOG SECTOR of the SMART function is executed, and
the result is printed.
When the operation is completed, [EXECUTE] key returns to the
normal display.
PR1200 V LASER DUTY MIDDLE (C) Laser DUTY select middle speed (C) 0 - 255 0 0 
W LASER DUTY MIDDLE (M) Laser DUTY select middle speed (M) 0 - 255 0 0 
X LASER DUTY MIDDLE (Y) Laser DUTY select middle speed (Y) 0 - 255 0 0 
Y LASER DUTY LOW (K) Laser DUTY select low speed (K) 0 - 255 0 0 
Z LASER DUTY LOW (C) Laser DUTY select low speed (C) 0 - 255 0 0 
AA LASER DUTY LOW (M) Laser DUTY select low speed (M) 0 - 255 0 0 
AB LASER DUTY LOW (Y) Laser DUTY select low speed (Y) 0 - 255 0 0 
AC LASER DUTY MIDDLE(BW) Laser DUTY select middle speed (BW) 0 - 255 0 0 
AD LASER DUTY LOW (BW) Laser DUTY select low speed (BW) 0 - 255 0 0 
Mode Item/Display Content
Setting
range
Default value
Destination
linkage
26cpm/
31cpm(A)
machine
36cpm
machine
Item/Display Content
Default
value
A MULTICOUNT Print quantity (1-999) 1
B PAPER MFT Tray
selection
1 Manual paper feed 2
(Paper
feed tray
1)
CS1 2 Paper feed tray 1
CS2 3 Paper feed tray 2
CS3 4 Paper feed tray 3
CS4 5 Paper feed tray 4
LCC 6 LCC
SHORT S.T Partial area diag
EXTENDED S.T All area diag