Installation manual

ENG-

E-23

POWER CABLING

Power supply cable

Blue

Brown

Green/Yellow-striped

Power supply

Blue

Live

Green/Yellow-striped

Prepare a dedicated power supply circuit.

9K-Btu/h type 12K-Btu/h type 18K-Btu/h type 24K-Btu/h type

Power supply 220 V - 240 V, single-phase

Circuit breaker 10 A 15 A 20 A 25 A

• Fit a disconnect switch, having a contact separation of at least 3mm in all poles, to the electricity

power line.

TEST RUN

(1) Start the operation with the remote control.

(2) To start test run in cooling, hold down the

AUX button on the unit for over 5 seconds

until a beep sound is heard and an operation

lamp flashes.

(3) Make sure the system runs well.

To stop the operation, press the AUX button

again.

ITEMS TO CHECK

Is the specified power supply voltage used?

Is the connecting cable fixed to terminal board firmly?

Is the earth wire connected properly arranged?

Is the drainage properly?

Is the indoor unit hooked to the mounting plate firmly?

Is there any gas leakage at the pipe connection?

EXPLANATION TO CUSTOMER

• Explain to the customer how to use and maintain the system, referring to the operation manual.

• Ask the customer to carefully read the operation manual.

• When the system has been set up, hand the installation manual to the customer.

Model 18000/24000 BTUModel 9000/12000 BTU

AUX

OM_AH-PN10 13GY_EN.indd Sec1:23OM_AH-PN10 13GY_EN.indd Sec1:23 12/22/11 6:30:40 PM12/22/11 6:30:40 PM