User Manual

MODE TEMP.

FAN TIMER

USING THE REMOTE CONTROL

Point the remote control towards the unit’s receiver window and press the desired

button. A beep sound will be emitted when the unit receives the signal

• Make sure no objects, such as curtains, are between

the remote control and the unit.

• The remote control operates from up to 7 meters

away.

• Do not expose the receiver window to strong, direct

sunlight, which can adversely affect its operation. In

such case, close the curtains to block the sunlight.

• Use of a fluorescent lamp with a quick starter in the

same room might interfere with transmission of the

signal.

• The unit might be affected by signals emitted from the

remote control of a television, VCR or other equip-

ment used in the same room.

• Do not leave the remote control in direct sunlight or

near a heater. Also, protect the unit and remote con-

trol from moisture and shock which can discolour or

damage them.

HOW TO USE THE REMOTE CONTROL

INSTALLING BATTERIES Use two size-AAA (R03) batteries.

Remove the battery cover at the

back of the remote control.

Insert batteries in the compart-

ment, making sure the and

polarities are correctly

aligned.

• Lines will be indicated on the

display when batteries are

properly installed.

Reinstall the battery cover.

Battery cover

NOTES:

• The battery life is approximately one year with normal use.

• When you replace the batteries, always use two new ones of the same type.

• If the remote control does not operate normally after replacing the batteries, take out

the batteries and replace them again after 30 seconds.

• If you will not be using the unit for a long time, remove the batteries from the remote

control.