Specifications

buttons on this control are not applicable to this unit.
Press this button to select Timer On
setting. Pressing the + or - button
during the first 5 seconds adjusts the
time value by one minute each time
pressed. Holding the + or - button down
for more than 2 seconds changes the
time rapidly. While time is blinking,
press Timer On button to confirm
setting. After setting, repressing the
Timer On button cancels the operation.
symbol is displayed the remote control
will send a temperature reading to the
wall unit every 10 minutes. Press the
“I FEEL" button again to cancel operation.
When the "I FEEL"
sel ect
The functions below are not applicable
to this model.
direct ions
Some
X- FAN
X- FAN
ON/
OFF