User`s guide

Intel
®
StrongARM
®
SA-1110 Microprocessor Development Board User’s Guide 1-3
Introduction
Figure 1-2 shows a preliminary sideview of the SA-1110 development board:
The modular design of the SA-1110 Development Platform makes it a flexible, extendable and
reusable design that supports
1
the following requirements:
• Targeted for hand-held applications
• Multiple OS development platform
• Third-party vendor graphics accelerator development platform
• Development platform for SA-1111 Companion Chip
• SA-1110 Development Board may be used as a palm PC reference design and development
platform
• SA-1110 Development Board may be used as host board for PCI bridge ASIC/FPGA and a
Windows CE reference platform
• Battery powered design example
• Power management and battery management including SMBus and SBS development
platform
• RF communications development board with interfaces for CDMA and GSM and Bluetooth
2
RF modules
Figure 1-2. Preliminary Cross-Sectional view of SA-1110 Development Platform
A7371-01
XCVR
XCVR
GFX
SA-1110
SDRAM
2.25"
32 Surface
mount leds
Li-lon Battery
J3
J2
Plexi Glass
Plexi Glass
0.775"
mic
mic
Speaker
Touch Screen
Front Light
Sharp Reflective 3" LCD
SA-1111
5"
1.5"
3.4 cm
5 cm
Note: Not actual size
* Intel StrongARM is a registered trademark of ARM Ltd.
Full development system
with
Intel
®
StrongARM
®
*
SA-1111, GFX, LCD,
touch screen and
frontlight.
1. The SA-1110 Development Platform has not been certified as being compliant with FCC, CE, UC, or PTT telephone standards or regulations.
2. For the phase 4 release of this document, formal Bluetooth interface specifications were not available. For more information, see section
Section 4.13.3.