User`s guide

A-2 Intel
®
StrongARM
®
SA-1110 Microprocessor Development Board User’s Guide
CPLD Code
RD_nWR pin 18;
SA_PCE1n pin 19;
SA_PCE2n pin 20;
VX_OEn pin 22;
SA_A25 pin 23;
CS0n pin 25;
CS1n pin 27;
CS2n pin 28;
CS3n pin 30;
CS4n pin 31;
CS5n pin 33;
SWAP_FLASH pin 37 ;
CF_ENAB pin 34;
"BCR_OK is cleared on a cold power up and is set after the BCR
"is written the first time.
BCR_OK node ISTYPE ’reg_d keep’ ;
CF_IRQ_LVL2OE pin 13;
CF_BUS_ONn pin 35;
"TMS pin 7 ;
"TDO pin 32 ;
"TCK pin 26 ;
"TDI pin 1 ;
"-----------------------------------------------------
"Outputs
"-----------------------------------------------------
ADR_DIR pin 12;
XCV_DIR pin 44;
XCV_DATA_OEn pin 11;
VX_CF_OEn pin 6;
VX_A3_0_OEn pin 21;
FL_BNK1_CSn pin 43;
FL_BNK0_CSn pin 15;
NEP_REG_CSn pin 8;
BSR_RDn pin 14;
BCR_WRn pin 5;
BCR_OEn pin 3;
CF_ON node ;