Operation Manual

8
E
Creating a new target value le
1. Double-click the shortcut icon on the desktop.
2. Click “Create/Edit target value” on the home screen.
3. Click “Create a new target value le”.
4. Create a new target value le.
5. Click “Save”.
A new target value le is saved.
When “Save” is complete, the application proceeds to the “Edit target value les” screen.
“Create a new target value le” screen
(1)
(3)
(7)
(2)
(6)
(5)
(4)
(1) Chromaticity diagram
Color gamut and white point are displayed.
(2) Color gamut
• Select a color gamut standard from “Rec.2020”, “Rec.709”, “SMPTE-C”, “DCI-P3”, “AdobeRGB”, “sRGB”, “EBU”,
“Rec.2020 (Ref.monitor)*”, or “Custom”.
• When “Custom” is selected, x and y values of R, G, and B can be specied manually.
• Congured color gamut is displayed on the chromaticity diagram as a triangle drawn with solid lines.
(3) LUT (.Cube le) (optional)
Select LUTs (.Cube les) you want to load.
(4) Gamma
Congure gamma by specifying a value between “1.6” and “2.6” (in steps of 0.1) or selecting from “HLG” or “PQ”.
(5) Luminance
Congure luminance.
(6) White balance
• Congure white balance by specifying a value between “2500K” and “10000K” (in steps of 100K) or selecting from
“Custom”, “D50”, “D60”, “D65”, “DCI”, or “D65(Ref.monitor)*” .
• When “Custom” is selected, x and y values of white balance can be specied manually.
• White point of the congured white balance is displayed on the chromaticity diagram as a cross.
(7) Loading preset target values
You can load preset values of color mode to create target values based on them.
* When “Calibration” is performed with the target value le with the color gamut set to “Rec.2020 (Ref.monitor)” and the white
balance set to “D65(Ref.monitor)”, the color tone can be adjusted to replicate that of HDR video display of the reference
monitor.