Operation Manual

6
E
Starting up the software
If any other software is running, close them.
To start up the software, double-click the desktop shortcut icon “SHARP Display Calibration Utility”.
Once the home screen is displayed, select an operation you want to perform.
“Home” screen
(1)
(6)
(7)
(2)
(3)
(4)
(5)
(1) Calibration
Click to select a color mode you want to calibrate (see page 10), congure the colorimetric sensor settings (see page 11),
and start “Calibration”. (See page 12.)
(2) Create/Edit target value
Creates a target value le for “Calibration” for user settings. (See page 7.)
(3) Measurement
Click to select a color mode you want to measure (see page 10), congure the colorimetric sensor settings (see page 11),
and measure the monitor status. (See page 12.)
(4) Manual adjustment
Perform manual ne adjustment by watching an actual video displayed on the monitor. (See page 14.)
(5) Reference monitor emulation
If there is no colorimetric sensor, perform “Reference monitor emulation” to adjust the color expression of “USER1” and/
or “USER2” to replicate that of HDR video display of the reference monitor.
(6) Version information
Displays version information of this software.
(7) Exit
Exits this software.
TIPS
• The software can also be started by clicking the [Start] button and navigate to [SHARP Display Calibration Utility] - [SHARP
Display Calibration Utility].
• While this software is running, do not operate the menu of the monitor.
About This Software