Operation Manual

15
E
Reference Monitor Emulation
If there is no colorimetric sensor, perform “Reference monitor emulation” to adjust the color expression of “USER1” and/or
“USER2” of color mode to replicate that of HDR video display of the reference monitor.
If there is a colorimetric sensor, perform “Calibration” with the target value le with the color gamut set to “Rec.2020 (Ref.
monitor)” and the white balance set to “D65(Ref.monitor)”.
1. Connect a monitor to be adjusted to the computer with a USB cable.
2. Double-click the shortcut icon on the desktop.
3. Click “Reference monitor emulation” on the home screen.
If there is no video signal, input video signal to the monitor to be adjusted.
4. Select users to apply “Reference monitor emulation”.
“Reference monitor emulation” takes approximately 4 to 7 minutes per checked item.
5. Select gamma, and click “Congure”.
6. Once the conguration is complete, click (
) to exit.
“Reference monitor emulation” screen
Select users and gamma to be adjusted.
(1) Select users to apply “Reference monitor emulation”
(2) Select gamma
“Conguration in progress” screen
Progress is displayed for each user.
(3) Aborting Reference monitor emulation
Click to abort the conguration process.
After aborting, retry “Reference monitor emulation”.
“Conguration complete” screen
(4) (
) is displayed when succeeded, and ( ) is
displayed when failed
(1)
(2)
(3)
(4)