54GS-61S 70GS-61S COLOUR TELEVISION OPERATION MANUAL
Contents Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Sound Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Features Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . .15 On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 TV Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Teletext Mode . . . . .
Quick reference Guide Accessories å 54GS-61S 70GS-61S FARBFERNSEHGERAT BEDIENUNGSANLEITUNG Remote control Operation Manual Type-AA Dry Batteries Remote Control Battery Installation Before using the TV set for the first time, install the supplied dry batteries in the remote control. 1. With your thumb nail, pull up the slit as indicated by the arrow to remove the battery cover. NOTE: 2. Insert two batteries 1.5 V (Size "AA").
Antenna connections - VCR and TV BACK OF TV Mains Socket Outlet AC 220~240 V, 50 Hz SCART Lead (Not supplied) Aerial Cable (Not supplied) Aerial (Not supplied) Aerial Lead (Not supplied) Mains Socket Outlet AC 220~240 V, 50 Hz BACK OF VCR RF out Aerial in Audio/Video NOTE: See on -Typical connections- (page 27) for details of further connection possibilities.
Remote control 1. 2. 19. 20. 3. 4. 21. 5. 22. 6. 23. TV 1. Stand-by ON/OFF switch (TV) Video 2. Power ON / OFF switch (VCR) TV 3. 4. Digit buttons 0 ~ 9 Flashback button Teletext 5. 6. Colour button (green) Colour button (red) TV 7. 8. Volume Down/Cursor control Left Menu button Teletext 9. 10. 11. 12. 13. 14. Reveal button List selector Store button Cancel button Top/ Bottom/Full button Reset button Video 15. 16. 17. 18.
Controls & Terminals FRONT TV 54GS-61S 1. 2. 3. 4. 5. 6. 7. 8. Main Power On/Off Switch Power Indicator Program Selector (UP/DOWN) Volume Buttons (UP/DOWN) Remote Control Sensor Sound Indicator Remote Control Indicator (Only for model 70GS-61S) DOOR 8 6 5 4 3 2 1 8 7 6 5 4 3 2 1 70GS-61S Behind the door 9. Headphone Socket (3.5 mm Ø / 16~600 Ω) n VIDEO L/S/G/I R/S/G/I AUDIO 9 å HOW TO OPEN THE DOOR Press the top of the door, opening it slightly. Hook your finger inside and pull open.
Auto Installation Auto Installation System Your television set is provided with an Automatic Installation System which makes Installation easier. This new system is activated when you turn on the TV for the first time. 54GS-61S Procedure: 1. Connect the antenna jack in the antenna input terminal on the rear side of your TV-set. Then connect the TV power cable to a 220 ~ 240 V system. 2.
Stored programmes When the TV has finished the automatic search, the "Stored programmes" menu will appear on screen with a list of the channels, which have been memorised with the available options a) Select programme to be edited E/F. b) Edit this program RED button . c) Go to sorting mode GREEN button . d) Delete this program YELLOW button . e) Exit this menu BLUE button . With these options, you will be able to organise the real channels (CH **) memorised in the TV programmes (Pr 01 ...
Switching on Power supply on/off button This TV memorizes the Mode last used when it was switched off. When the main power button ( l) is pressed to turn on the set, the power indicator will light and the set will resume in either the Stand-by mode or Programme mode, depending upon its condition when it was switched off.
TV Operation Channel Selection Channel selector ( CH /\ / CH V) buttons Select the programme channel number you want to see, using the channel selector buttons (E/F). ➜ As you press these buttons a list of channels appears. Press the E/F again to select another channel. Note: The channels that are in SKIP mode cannot be seen with this buttons. Use numerical buttons to display these channels.
Audio Adjustments Loudspeakers Sound Volume ( C/I) Use the C/I buttons to increase/decrease the volume level. The volume indicator will appear on the screen. Note: To adjust the headphones volume, see the “SOUND menu” on page 14. Sound mute button (c) Press the button to mute the sound. “MUTE” appears on the screen. Press the button again to turn the sound back on. MUTE /i Sound Mode Selector button I/II/I+II Press the button to change the sound in the speakers.
Other Features TV/Video selector button (TV/VIDEO) With this button you can select either source of input for the TV. 1. When the TV/VIDEO button is pressed, the «TV/Video Menu» selection menu appears. 2. Press the button of the corresponding colour to select one of the input sources, as indicated in the diagram. The selected input will appear on the screen. 3. Press the TV/VIDEO button again to exit the menu.
Menu Structures This TV set has: a MAIN MENU with four basic menus, which permit access to the different functions of the TV. These menus are as indicated below. MENU Button By pressing the MENU Button: Main Menu Button Menu PICTURE RED ADJUSTMENTS Functions / Options CONTRAST COLOUR BRIGHTNESS SHARPNESS NORMALISE TINT CONTROL ECO MODE LOUDSPEAKERS VOLUME BASS TREBLE ADJUSTMENTS BALANCE NORMALISE LOUDSPEAKERS (MODE) SPATIAL EXPANDER A.S.L.
Picture Adjustments Picture quality: CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS, NORMALISE, TINT CONTROL and ECO MODE are adjustable in this menu. 1. Press the MENU button , to see the MAIN Menu. 2. Press the RED button 3. to see the PICTURE Menu. PICTURE Menu Press the Cursor UP/DOWN buttons E/F to select an option from the list: CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS or NORMALISE. MAIN Menu RED PICTURE Menu CONTRAST COLOUR The selected item will appear on screen in a blue box. BRIGHTNESS 4.
Sound Setting Mode Sound quality (VOLUME, BASS, TREBLE, BALANCE, NORMALISE, SOUND MODE, SPATIAL EXPANDER and A.S.L.) are adjustable in this menu. MAIN Menu 1. Press the MENU button , to see the MAIN Menu. 2. Press the GREEN button to see the SOUND Menu. GREEN SOUND Menu 3. Press the RED button to select LOUDSPEAKERS or press the GREEN button to select HEADPHONES. 4. Press the Cursor UP / DOWN buttons E/F to select an option from the list: VOLUME, BASS, TREBLE, BALANCE or NORMALISE.
Features setting mode In this mode you can select a LANGUAGE for screen menus, set the ONTIMER an OFF-TIMER, view the all functions implemented in your TV set demonstration and set the CHILD LOCK. 1. Press the MENU button , to see the MAIN Menu. 2. Press the YELLOW button to see the FEATURES Menu MAIN Menu YELLOW FEATURES Menu - LANGUAGE FEATURES Menu 3. Press the Cursor UP/DOWN buttons E/F to select an option from the list: LANGUAGE, ON TIMER, OFF TIMER, DEMO or CHILD LOCK.
FEATURES Menu - OFF TIMER OFF TIMER The OFF TIMER automatically switches the TV set to standby mode after a predetermined period, (30, 60, 90 or 120 minutes). LANGUAGE 4. Press the Cursor RIGHT button I to select “OFF.” ON TIMER 5. Press the Cursor UP/DOWN buttons E/F to set the desired time in white letters. OFF TIMER DEMO OFF 120 Min. 90 Min. 60 Min. 30 Min. Select “OFF” to disconnect off-timer. ➜ 6. Press the GREEN button MEMORIZE to memorize.
TV Channel Setting Auto Channel Preset with Sorting (ACSS: Automatic Channel Sorting System) This function frees you of troublesome channel presetting procedures. Simply follow the instructions below to automatically store all on-air and cable real channels into the programme channel memories. 1. Press the MENU button , to see the MAIN Menu. 2. Press the BLUE button MAIN Menu BLUE TUNE Menu to see the TUNE Menu. Pr 06 CH21 CHANNEL TUNE Menu SEARCH 3.
Manual Channel Preset (PRESET USING REAL CHANNEL NUMBERS) 1. Depending on the programme channel you want to preset, press the 6 button to select single / double digit entry. 2. Select the programme channel number you want to preset with the 0 ~ 9 digit buttons. 3. Press the MENU button to see the MAIN Menu. MAIN Menu MAIN Menu 4. Press the BLUE button to see the TUNE Menu. BLUE TUNE Menu TUNE Menu The “CHANNEL” option is already selected. CHANNEL 5.
Manual Channel Preset (PRESET USING FREQUENCY TUNING) 1. Depending on the programme channel you want to preset, press the 6 button to select single / double digit entry. 2. Select the programme channel number you want to preset with the 0 ~ 9 digit buttons. 3. Press the MENU button to see the MAIN Menu. MAIN Menu MAIN Menu 4. Press the BLUE button to see the TUNE Menu. BLUE TUNE Menu TUNE Menu The “CHANNEL” option is already selected. CHANNEL 5.
After preset has been performed The following features are available for preset channels: MAIN Menu FINE TUNING When a preset programme channel is not exactly tuned, you can fine tune the channel in this mode. 1. Select the programme channel number you want to tune using the 0 ~ 9 digit buttons. TUNE Menu 2. Press the MENU button to see the MAIN Menu. MAIN Menu 3. Press the BLUE button BLUE CHANNEL to see the TUNE Menu. CH CC Pr 06 CH 21 SEARCH TUNE Menu F-TUNE 4.
TELETEXT - Mode What is Teletext? Teletext is an information service, organized like a magazine, which is provided by some television stations in addition to regular television broadcasting. Your television receives special Teletext signals broadcast by a TV station, processes the information and displays it graphically on the screen. News, weather and sports information, stock exchange prices, program previews and closed captioning for the deaf are among the many services available through Teletext.
Other TEXT features common to the two systems TEXT/MIX button (a/b) Every time this button is pressed, the Teletext is displayed in different modes, following the sequence described: In TV mode: Press the TEXT/MIX button (a/b) to select Teletext mode. In Teletext mode: Press the TEXT/MIX button (a/b) to superimpose a teletext broadcast onto the current TV programme screen. In Mixed mode: Press the TEXT/MIX button (a/b) again to return to the normal teletext screen.
Advanced TEXT operation - LIST mode Teletext Page memory List a) How to Operate Page Memory Your TV has 40 teletext page number memories for fast recall of teletext information. In programme positions 1 through 9, four teletext page numbers can be stored in each position; a total of 36 pages. In programme positions 10 through 99, only one programme with 4 page numbers can be stored.
Child Lock (Channel Block) You can lock a TV channel to prevent unsupervised TV viewing by following these procedures; the protection can apply to the television itself "LOCK ALL" or to specific programmes "LOCK PROGRAMME". With the CHILD LOCK function, you can also programme a time period during which the TV will be protected. 1. Press the MENU button , to see the MAIN Menu. 2. Press the YELLOW button to see the FEATURES Menu. MAIN Menu YELLOW FEATURES Menu FEATURES Menu 3.
LOCK PROGRAMME menu LOCK PROGRAMME Select this option to protect the access to separate programmes LOCK ALL ➜ NONE 1. Press the TV button , to clear the on-screen display. LOCK PROG. AUTO (VPS) ALWAYS LOCKED 2. Select the programme channel number you want to protect using the START: **:** CLEAR LOCK STOP: **:** 0 ~ 9 digit buttons or the channel selector E/F buttons.. 3. Repeat steps 1. to 4. (Page 24) to see the CHILD LOCK Menu. 4.
21-pin Euro-SCART and 21-pin Audio/Video REAR TV 1 21-pin In/Out 1. 21-pin Audio/Video (AV-1) With S-Video Input 2. 21-pin Euro SCART (Full connect, RGB) RF Input 3. Antenna terminal 2 3 21-pin Euro-SCART (RGB) 1. 2. 3. 4. 5. 6. 7. Audio right output Audio right input Audio left output Common earth for audio Earth for blue Audio left input Blue input 8. 9. 10. 11. 12. 13. 14. Audio-video control Earth for green Not used Green input Not used Earth for red Not used 15. 16. 17. 18. 19. 20. 21.
Typical connection (Videorecorder/Decoder) through the 21-pin Euro-SCART Please refer to the operation manual of your VCR for details Typical connection (Videorecorder and TV) through the RF terminal and Decoder through the 21-pin Euro-SCART VCR RF out RF in SCART/AV TV RF in 21-pin Euro-SCART Decoder Typical connection (DVD, Decoder and TV) through the 21-pin Euro-SCART SCART/AV TV RF in DVD Player Video out Audio out 21-pin Euro-SCART Decoder 27
Troubleshooting ● Increase the volume Check if the Brightness or Contrast setting in the picture setting mode might be all the way to the minus side Try fine tuning to correct Check batteries in the Remote Control Adjust COLOUR control Turn OFF using the Main Power button, then turn ON again after a minute Check for local interference ● If outside antenna is used, check for broken wires ● Antenna not connected to terminal at the back of the TV set Main power button of TV not ON Remote control
GENERAL SPECIFICATIONS FOR TELEVISION RECEIVER Model: 54GS-61S, 70GS-61S 1. Receiving Broadcast Standard CCIR TV Standard system B/G, PAL 2. Receiving Channel VHF: UHF: CATV: 3. Receiving System 4. Power Source 220V-240V AC 50 Hz 5. Power Consumption at 240V AC 50Hz 54GS-61S 52 W 70GS-61S 87 W 6. Power Consumption at (Stand-by) 3 W max. 3 W max. 7.
Index M Main power button . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Manual Channel Preset . . . . . . . . . . . . . . . . . . 18, 19 Menu Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 21-pin Audio/Video . . . . . . . . . . . . . . . . . . . . . . . . . 26 21-pin Euro-SCART (RGB) . . . . . . . . . . . . . . . . . . . 26 A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
å SHARP ELECTRONICS (EUROPE) GmbH Sonninstraße 3, 20097 Hamburg, Germany SHARP ELECTRONICA ESPAÑA, S.A.