User Guide

L
R
4 x
2
1
3
1 2
2
1
3
4
5
6
7
2
1
3
3
2
1
3
1 2
L
R
Terms and conditions apply. Online registration only.
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
Connectivity
A
Ethernet/LAN* Network connection
SAT IN
I
Satellite input
J
C
K
USB
D
USB 2.0 input x2
HDMI 4
L
HDMI input
E
M
HDMI 1
F
HDMI input (eARC)
TF Card in
N
TransFlash / micro SD Card input
HDMI 2
G
HDMI input
CI Card in Common Interface module
AV IN
H
Audio/Video input
Earphones Earphone output
Service Input
Input is used only by
service centres
Digital Audio Digital Optical Audio Output
RF IN RF / TV aerial input
HDMI 3 HDMI input
B
M
I
J
K
L
H
(mini)
N
B
C
D
E
F
G
A
4 First time installation
When the set fi rst turns on, it will ask you to select your preferred on-screen
display language. This will change the language in which the menus and
associated information is displayed in.
Basic installation steps are shown below. These may vary slightly depending on your model. Due to Android software updates, the look and feel
of the TV start up procedure and subsequent menus can be subject to change.
Android Phone users
During the set-up process, you will be prompted to sign-in
to your Google account using your pre-installed “Google”
app. This set up process will depend upon which model TV
you are setting up. Please ensure you have your account
details to hand.
5 Pairing the remote 6 The Google Assistant
Using the Google Assistant with your voice
Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in
microphone. To use this feature with the Google Assistant remote control, follow the instructions as
below.
Before using the Google Assistant, you will need to pair the remote. Please follow step 5 of this guide to
pair your remote to enable the Google Assistant.
Press the button. The LED indicator on the remote control will illuminate.
Wait for the on-screen message from the Google Assistant, then speak into the microphone. A good rule
of thumb is to have the microphone positioned about 15-30 centimetres away from your mouth.
By speaking into the microphone, you can search for various content or control your connected smart
home devices. Speech examples may be displayed on the television screen depending on your model.
If during the fi rst time installation process the remote was not paired or skipped, then follow the process below
to pair your remote with the television.
Turn the set on.
Press the button on the remote control.
The pairing screen will appear on the TV.
Now press and hold the ”Left” and “Home” buttons on the remote simultaneously (highlighted).
The LED indicator on the remote control will start to fl ash.
Select the detected remote control shown on the screen and press OK.
Once paired the pairing screen will disappear.
This process will only need to be carried out if the remote is not paired. Once paired, when the button is
pressed it will open the Google Assistant screen on the set and activate voice functionality.
Connect the TV to your power socket.
If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to
your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
Connect to the internet. Ethernet provides the most stable connection.
Insert the batteries supplied into the remote
controls and press the standby button to power
on the TV.
Wall Mounting the TV
Image for illustration only.
Remove the four screws that are supplied
in the wall mounting holes.
The wall mount can now be easily attached to
the mounting holes on the rear of the TV.
Install the wall mounting bracket to the
television as advised by the bracket
manufacturer.
The picture shows the use of spacers, which are
not applicable to all sets/installations.
For the dimensions of the VESA mount-
ing, please refer to the Technical Specifi -
cations section of this document.
Press to navigate up
Press to confi rm a selection
Press to navigate right
Press to navigate left
Press to navigate down
Microphone
+ LED
1 Fitting the stand
2 Connecting your set 3
Powering On the TV
Setting up the TV set for the  rst time
Used for attaching the stand
to the TV set (fi g.2)
The TV panel must be facing downwards.
For the stand installation, there
is one type of screw provided as
shown below.
Note: To complete the stand
installation you will require a
cross head screw driver.
Remote Control:
Installing Batteries
4 x
Switch on the television by pressing the on/
off button on the bottom of the LED light.
LED Light
Place the TV set on a fl at and clean surface with the panel facing
downwards to avoid damage.
Ensure the stand feet match the orientation as shown above.