Technical data

INITIAL SETTINGS

Adjust the ringing volume of the machine using the procedure below.

Factory setting: 3 (MEDIUM)

Step Press these keys Comments

1 “OPTION SETTING” will

appear in the display.

2 “RINGING VOLUME” will

appear in the display.

3 Press the or key to

lower or raise the volume

to the desired level.

4 “STORED” will appear in

the display.

5 Press the STOP key twice

to exit.

Adjusting the Ringing Volume

You can select the length in seconds of the alarm beeps following the procedure

below.

Factory setting: 1 (3SEC)

Step Press these keys Comments

1 “OPTION SETTING” will

appear in the display.

2 “BEEP LENGTH” will

appear in the display.

3 Press the or key to

set the alarm beeps to the

desired length or to turn

them off.

4 “STORED” will appear in

the display.

5 Press the STOP key twice

to exit.

Setting the Length of Alarm Beeps

FUNCTION

GHI

PQRS

ENTER

STOP

FUNCTION

GHI

ENTER

STOP

SUK 06 INITIAL LEO.p65 30/03/00, 17:0045