Technical data

38
PROBLEMS
5
SPF release button
SPF release button
Misfeed removal
D. Misfeed in the SPF
An original misfeed may occur at one of three locations. If the misfed original can
be seen only in the document feeder tray, proceed to (A) below. If the original can
be seen in the exit area, proceed to (B) below. If the misfed original cannot be seen
in the document feeder tray or the exit area, proceed to (C) below. Remove the
(B)While pressing the SPF release button, pull the original gently to the right and
out from theexit area. Open and close the original cover to clear the SPF
misfeed ( )indicator. If the misfed original cannot be easily removed, proceed
to (C) without pulling the original forcibly.
(C)If the original does not move easily into the exit area, remove it in the
direction of the arrow.
may appear in the display, indicating that one original must be
returned to the document feeder tray.
Clear the misfeed and return the required number of originals.Then press
the print ( )key to resume copying.
misfed original following the instructions for each location.
(A)While pressing the SPF release button, pull the original gently to the right and
out from the document feeder tray. Open and close the original cover to clear
the SPF misfeed ( ) indicator. If the misfed original cannot be easily removed,
proceed to (C) without pulling the original forcibly from the document feeder
tray.
SUK 05 MACHINE TROUBLE LEO.p65 30/03/00, 16:4738