Technical data

26
SPECIAL FUNCTIONS
3
Toner save mode
1
When the machine is used as a laser printer, the toner save mode
which is set as described below does not function. Set the toner save
mode using the printer driver.
2
Press the exposure mode selector key to select the manual (
=
) mode.
3
Press and hold down the exposure mode selector key for approximately
5 seconds.
The manual (
=
) indicator will go out and the photo ( ) indicator will
begin to blink. The exposure indicator marked “5” will light up, indicating
the standard toner mode is active.
To enter the toner save mode, press the light (
{
) key.
The exposure indicator marked “1” will light up, indicating the toner save
mode is selected.
4
Press the exposure mode selector key twice. The photo ( ) indicator will
stop blinking and the AUTO indicator will light up steadily. The toner save
mode is now active.
To return to the standard mode, repeat the procedure but use the dark
(
}
) key to select exposure level “5” in step 3.
SUK 03 SPECIAL FUNCTIONS LEO.p65 27/03/00, 14:4526