Specifications

CA10 Course Notes
Sharp Electronics (UK) Limited
CE Technical Support GroupPage 2
CA10 Receiver Specifications
The table below lists all of the current range ( as of January 1998 ) of Sharp television receivers utilising
the CA10 chassis. Note that the receivers featuring a sub-woofer will have an extra drive PWB fitted and
the SRS models will have the SRS sound processing sub PWB fitted.
Features 51DS02H 51DS03H 51DS05H 59DS03H 59DS05H 66DS03H 66DS05H
Tube Size ( inches ) 21 21 21 25 25 28 28
Visible Screen ( cm ) 51 51 51 59 59 66 66
Tube Type B Matrix B Matrix B Matrix B Matrix B Matrix B Matrix B Matrix
Number of Pre-sets 99 99 99 99 99 99 99
Auto Sort Yes Yes Yes Yes Yes Yes Yes
Fast Text Yes Yes Yes Yes Yes Yes Yes
NICAM Yes Yes Yes Yes Yes Yes Yes
SRS/3D Sound - - Yes - Yes - Yes
AI-OPC - - Yes - Yes - Yes
On/Off Timer Yes Yes Yes Yes Yes Yes Yes
Rear S-VHS Input - - Yes - Yes - Yes
21 Pin Euroscart 2 2 2 2 2 2 2
Ext Speaker Output - - - - S Woof - S Woof
Power Output ( MPO ) 2x4 2x10 2x10 2x10 2x10+20 2x10 2x10+20
Headphone Jack Yes Yes Yes Yes Yes Yes Yes
Stand Yes Yes Yes Yes - Yes -
Cabinet - - - - Yes - Yes
Width ( mm ) 539 612 612 695 695 740 740
Height ( mm ) 468 458 458 537 537 566 566
Depth ( mm ) 484 492 492 431 431 470 470
S/B Power 3W 3W 3W 3W 3W 3W 3W
Note :
Sharp reserve the right to make design and specification changes for product improvement.
The performance specification figures are nominal values of production units. There may be some
deviation from these figures in individual units.
To complete this range of television receivers, the CS chassis is used for the Dolby Pro-logic models
59CSD8H and 66CSD8H.