Specifications

8-6 Chapter 8: NCR 7401 7890/7892 Scanner Differences
7401 Scanner Default Settings
The7401Scannerissetupinmanufacturingusinganadditionalstring
ofcommandstochangesomeofthedefaultsettingsthatareprovided
withthe7890and7892scanners.Refertothe7890and7892documents
forthecompletelistofdefaults.
Thedefaultsspecificallyprogrammedforthe7401Scanner
arelisted
below.Thesedefaultsaredifferentfromthe7890and7892defaults.
Hex Command ASCII
Command
Command Description Comments
31h,30h,35h, 1,0,5 SelectRS‐232
protocol
The7401Scannercan
onlybeusedonan
RS‐232connection.
31h,34h,30h, 1,4,0 DisableCode39 Enablewith1,4,A,1
31h,35h,30h, 1,5,0 DisableInterleaved
2of5
Enablewith1,5,A,1
31h,37h,30h, 1,7,0 DisableCode128 Enablewith1,7,A,1
31h,31h,30h, 1,1,0 DisableGoodRead
Tone
Enablewith1,1,A,1
31h,32h,43h,35h 1,2,C,5 30SecondActive
Time
Othertimescanbe
programmed;seethe
7890programming
books.
