Specifications

Chapter 6: Operating System Recovery 6-29

OS Recovery from a Larger Disk Image

ThefollowingprocedureshouldbeusedtorestoreanOperating

Systemwhenthedestinationdiskissmallerthanthesourceimage(i.e.

OSRecoverywasmadeona10GBsourcedisk,butisbeingrecovered

ona4.3GBdrive).

1. Bootthesystem.

Youshouldseeamessageduring

bootindicatingthattheCD‐ROM

hasbeenrecognized:

Micro Solutions BACKPACK CD-ROM v0.3

. . .

Booting from BACKPACK CD

Starting MS-DOS

2. FollowtheDOSscreenprompts.Aftereachentry,youareaskedto

confirmyourinput.Youcanuse1oryforYes,2ornforNo.

3. EnterNoattheDisk verificationquestion.

4. Selectwhichtypeofrecoveryyouwanttoperformfromthenext

(normallyoption#1).

1) Redoentirediskwiththefirstpartitionthesamesize.

2) RedothefirstOSpartition.

3) RedothesecondOSpartition.

5. AtthePressanykeytocontinuedialogbox,press[CTRL]-Cto abort

theprocess.WhenaskedTerminate batch job?

AnswerY.

6. Fromthe

commandprompt,changetodriveZ,whichisthelocation

oftheGhostsoftware(CD‐ROMdrive).

7. RuntheGhostcommand.

Ghost.exe

8. PressEnter.