Specifications

Chapter 6: Operating System Recovery 6-3
Updating Procedures
1. ApplypowertotheterminalsotheCD‐ROMdrivecanbeopened.
2. InserttheCDthatcontainstheoperatingsystemimage.
7401 Model Software CD LPINs
Win2000 WinXPe WinNT Win98
7401‐21xx,31xx NotSupported NotSupported D370‐0433‐0100 D370‐0444‐0100*
7401‐22xx,25xx,
32xx,35xx
D370‐0504‐0100 D370‐0485‐0100 D370‐0483‐0100 D370‐0481‐0100*
7401‐26xx D370‐0484‐0100 D370‐0567‐0100 D370‐0483‐0100 NotSupported
7401‐45xx D370‐0554‐0100 NotSupported D370‐0553‐0100 NotSupported
7401‐46xx D370‐0484‐0100 D370‐0567‐0100 D370‐0553‐0100 NotSupported
*SupportforWindows98hasbeendiscontinued.
3. Boottheterminal.
4. PressF2atthescreenprompttoentertheSetupUtility.
5. IntheAdvancedmenu,selectI/O Device Configuration.
6. VerifythatLPT 1 Mode issetto ECP.
7. GobacktotheAdvancedmenu,selectMultiple ROM Menu.
8. Set
theParallel CD-ROM BoottoEnabled.
9. ExitSetupandSaveChanges.
Astheterminalreboots,youshouldseeamessageduringboot
indicatingthattheCD‐ROMhasbeenrecognized:
Micro Solutions BACKPACK CD-ROM v0.3
. . .
Booting from BACKPACK CD
Starting MS-DOS