Specifications

6-2 Chapter 6: Operating System Recovery
7401-22xx/35xx Prerequisite
OnterminalsequippedwithPentiumIII/Celeronprocessorsyoumust
releasememoryresourcestopermitCD‐ROMaccess.RefertotheSetup
chapterandmakethefollowingchangestotheBIOSsettings(Setup
Utility).
 ResetBIOStoDefaultsettings
 SettheOn‐BoardIntelPXEtoDisabled
External CD-ROM
If
youdonothaveanintegratedCD‐ROMdrive,connecttheexternal
CD‐ROMasfollows.
1. ConnecttheexternalCD‐ROM(2336‐K007)drivetotheparallelport
ontheterminal.
2. ConnecttheoppositeendoftheCD‐ROMcable(endwiththe
powerconnectorpigtail)totheCD
‐ROMdriveparallelconnector.
18250
Parallel Connector
Parallel Connector
Power
Connector
