Specifications

Chapter 4: 7401-4xxx Hardware Installation 4-25

2. ReadtheEULA(End‐UserLicenseAgreement)informationinthe

DOSwindow,thentypeEXITandpressEntertoclosetheDOS

window.

3. StarttheNetworkSetup Wizard.

4. Selectoptionstoidentifythenetworkinformationfortheterminal

environment.

5. EntertheComputerDescription.

6. Enterthe

ComputerName.

7. EntertheWorkgroupName.

8. Whenprompted,pressFinishtoreboottheterminal.

9. Loginwhenprompted.

OpentheControlPanelorusetheTouchWareIcononthedesktopand

runtheMicroTouchscreencalibration. 

Completing the OS Installation (WinNT)

Thesystemautomaticallyrebootswhentheimagerecoveryiscomplete

andstartsthesoftwareinstallation.Thisinstallationalsoinstallsmost

oftheadditionalsoftwareanddriversthatareincludedinthedisk

image.Completetheinstallationasfollows.

1. Aftertheterminalreboots,pressNextattheWindowsSetupscreen.

AccepttheMicrosoftlicense agreement.

3. EntertheUserNameand Organization.

4. EntertheComputerNamefortheclient.

5. EntertheAdministrator’sAccountPassword(optional)

6. Whenprompted,pressFinishtoreboottheclient. 

7. Loginwhenprompted.

8. OpentheControlPanelandruntheMicroTouch

screencalibration.