Specifications

4-22 Chapter 4: 7401-4xxx Hardware Installation
4055 Uninterruptible Power System (UPS)
TheNCR4055UPSisavailableintwomodelsforthe7401:
Item Description Volt/Hz
4055‐1300‐7194 300VA/180WattKioskUPS 120Volt/60Hz
4055‐1500‐7194 500VA/300WattKioskUPS 120Volt/60Hz
19412

PowerMonIISoftware(G099‐4551‐0100)isrecommendedforuse
withthe4055UPSandthe7401.
Note: OnWindows2000,thePowerMonsoftwaremayappeartonot
fullyshutthesystemdown.Insuchcasesyoumaystillseeadim
display.Thisdoesnotcausethe
lossofanydata.
Installing the UPS
RefertotheUser’sManualdeliveredwiththeNCR4055UPSbefore
installingtheUPSforusewiththe7401.
ToinstalltheUPSwiththe7401connectthepowercableandtheLAN
cablefromthe7401totheUPS.Thenconnectthein‐houseLANcable
totheUPS,
andthepowercableontheUPStotheACpoweroutlet.
Note: Ifyouareinstalling7401‐4xxxontheEasyPoint45Pedestal,the
UPSmustbeinstalledfirst.See2336‐K045FeatureKitformore
information.