Specifications

4-8 Chapter 4: 7401-4xxx Hardware Installation
3. LiftthedooruntilitissupportedontheGasShock.
4. RemovetheMSRBlankfromtherightsideoftheCabinet.
5. RemovetheCableClamp.
6. PlugtheMSRcableintotheMSRConnectorontheCoreModule.
19904a
Cable Clamp
MSR Connector

7. AttachtheMSRassemblyusingtheMSRMo untingscrews(2).
8. AttachtheCableClampremovedinstep5totheMSRMounting
Bracket(rearhole).
Installing Country Keyboards
Thefollowinginternationalcountrykeyboardsareshippedseparate
fromthe7401‐4xxxterminalandmustbeinstalledinthefield.The
requiredkeyboardandtrackballcablesarepre‐installedinthe7401‐
4xxxkeyboardtray.
 Swedish/FinnishRuggedKeyboard(2336‐K206)
 ItalianRuggedKeyboard(2336‐K207)
Usethefollowingprocedures
toinstallacountrykeyboard.
1. Unplugthepowercordtoremovepowerfromtheterminal.