Specifications

3-44 Chapter 3: 7401-2xxx/3xxx Hardware Installation
Installing the UPS
RefertotheUser’sManualdeliveredwiththeNCR4055UPSbefore
installingtheUPSforusewiththe7401.
ToinstalltheUPSwiththe7401connectthepowercableandtheLAN
cablefromthe7401totheUPS.Thenconnectthein‐houseLANcable
totheUPS,
andthepowercableontheUPStotheACpoweroutlet.
Note: IfyouareinstallingtheK580/K590SelfServicePrinterorthe
PrinterSpacerinaPedestalMount,theUPSmustbeinstalledfirst.See
7401‐K037and7401‐K052FeatureKitsformoreinformation.
Installing the Power Mon II Software
ThePowerMonIIsoftwareisprovidedonCD‐ROMandmaybe
installedoveranetworkorusinganintegratedorparallelCD‐ROM
drive.AlloperatingsystemversionsofthePowerMonsoftwareand
installationdocumentationarecontainedontheCD.
ThePowerMoninstallationshouldautostart.
Ifitdoesn’t,browsethe
CDfortheoperatingsystemyouareusingandrunSetup.exeforthat
operatingsystem.Followthepromptstoinstallthesoftware.
Note: WhenyouarepromptedforConfigurationCode,enter7to
identifytheinterfacecabletype.