Specifications

Chapter 3: 7401-2xxx/3xxx Hardware Installation 3-23
2. Thecablesforthe7401canberoutedthroughanopeninginthe
backoftheFixed‐AngleMount,oryoucanremovetheplastic
knockoutinthebottomofthemounttopermitroutingthecables
downthroughtheflatsurface.Ifyouareroutingcablesoutthe
bottom,drillaholeintheflatsurfacealignedwiththerectangular
openingintheMountingPlate.
3. Installthe7401totheMountingPlate.Theslotsonthebottomof
theFixed‐AngleMountmatetolockingtabsontheMountingPlate.
4. InstalltheSecuringScrew.