Instruction manual

9-4 Hoist Specification LE501P1
76
Table 1003
Figure 1001
Wire rope classification/construction
5x19 or 5x26 with
fiber core lubricated,
preformed IPS or
XIPS
nominal diameter
in. 5/16 in.
mm 8.4 mm
maximum allowed
diameter tolerances
in. 0.319 to 0.331
mm 8.1 to 8.4
minimum actual breaking
strength
lbs 10,000
kN 44.5
Hoist Model XE301P
with BLOCSTOP model BSO 500
Rated Load
lbs 700.0
kg 300.0
Lifting Speed
ft/min 35.0
m/min 11.0
Weight (with BSO)
lbs 77.0
kg 35.0
Dimensions over all
a
in. 28.9
mm 735.0
b
in. 11.2
mm 286.0
c
in. 12.5
mm 314.0
Motor Specifications
Single phase 110V / 60 cycles
Kw
A 10.5
Single phase 220V / 60 cycles
Kw
A 5.2
wire rope diameter
in. 5/16"
mm 8.4
Misc. Info:
- Hoist shall self reeve the wire rope
- Continuously duty motor TEFC
- Secondary brake shall be externally attached to the hoist
mechanism.
- Emergency lowering without power shall be by means of a
mechanical centrifugal brake.