Instruction manual

5.4 Brake Removal
1) Remove the fan snap ring {Code #3866, Pos.
21} shown in Figure 512.
2) Remove the fan {Code #16186, Pos. 7} with
two screwdrivers placed under the fan and
against the motor shaft and pry upward
(Figure 513).
3) If the fan key {Code #16256, Pos. 23} is
removable, do so. If not, just wrap some tape
around the keyway for safety (Figure 514,
515).
4) Remove the three socket head fixing screws
w/ locking washers.
5) Remove the whole brake assembly {Code
#49746 (110 V), or #47406 (220 V) Pos. 35}
as shown in Figure 516.
34
Figure 515
Figure 514
Figure 513
Figure 512
NOTE:
Prior to removal, pay attention to the brake orien-
tation and mark it for realignment (Figure 511).
Figure 511
Figure 516