Instruction manual

4) Install the lower cup seal {Code #39376, Pos.
39} as shown in Figure 435.
5) Insert the large brass gear {Code #22387,
Pos. 6} into the gear case as shown in Figure
436.
6) With a press or punch, seat the large brass
gear {Code #22387, Pos. 6} into the gearbox
as shown in Figure 437. Be careful not to
damage worm wheel.
7) Install the spacer(s) {Code #25136, Pos. 21}
and snap ring {Code #16576, Pos. 22} above
the bearing as shown in Figures 438-440.
Make sure that the snap ring is fitted into the
groove.
26
Figure 434
Figure 435
Figure 436
Figure 437
Figure 438
Figure 439
Figure 440