Specifications

Loading the Document

Other restrictions

♦ The scanner cannot recognise yellow, greenish yellow, or light blue ink.

♦ Ink, glue, and correcting fluid on documents must be dry before they pass

through the document feeder.

♦ All clips, staples, and pins must be removed from documents before loading

in the feeder. If these are not removed, they may damage the machine.

♦ Documents which are patched, taped, torn, smaller than the minimum size,

carbon backed, easily smudged, or have a slick coated surface should be

photocopied, and the copy loaded in the feeder.

Loading the Document

Up to 20 A4-size pages can be placed in the feeder at once. The pages will

automatically feed into the machine starting from the bottom page.

♦ If you need to send or copy more than the maximum number of pages,

place the additional pages gently and carefully in the feeder just before the

last page is scanned. Do not try to force them in, as this may cause double-

feeding or jamming.

♦ If your document consists of several large or thick pages which must be

loaded one at a time, insert each page into the feeder as the previous page

is being scanned. Insert gently to prevent double-feeding.

1 Adjust the document guides to the

width of your document.

2 Insert the document face down in the

document feeder. The top edge of the

document should enter the feeder first.

• READY TO SEND will appear in the

display.

all.book Page 30 Friday, October 31, 2003 4:10 PM