Specifications

Installing the Toner Cartridge
17
1. Installation
5 Place your thumb on the centre of the
handle where it is marked PUSH, and
push the handle down and in so that
the cartridge fits into place.
6 Close the print compartment cover,
pressing down firmly on each side to
make sure it is completely closed.
7 Reset the toner counter and the drum counter as explained below and
on the following page.
Resetting the toner counter
Each time you install a new toner cartridge, follow the steps below to reset the
toner counter to zero. (The machine uses the toner counter to inform you
when the toner cartridge needs to be replaced.)
1 Press once and 4 times.
2 Press once and twice.
3 Press once.
F
UNCTIO
N
Display:
PRESS START KEY
PRINT SET-UP
CLR TONER CNT.
all.book Page 17 Friday, October 31, 2003 4:10 PM