User Manual

E 14
1 When the inset screen (PIP)
is displayed, press
TV/VIDEO
.
• The input for the inset screen
changes in the following order.
2 When the inset screen (PIP) is displayed, press
PIP-CH ' / "
to
select the desired channel for the inset screen.
• If main screen is TV channel.
• If main screen is AV channel.
Input/channel selection of inset screen
AV1
(SAV1)
AV3
(SAV3)
TV
(Current viewing channel)
(AV2)*
(AV1)
5
* The inset screen (PIP) does not display the signal input via
Component-in terminal. (AV2 will not appeared.)
• When main screen is TV channel, inset screen can only show the
main screen TV channel and other AV inputs by pressing
PIP-CH ' / "
.
1 When the inset screen (PIP)
is displayed, press
SWAP
.
• The inset screen changes over
with the main screen.
2 Press
FREEZE
.
• The inset screen displays a still
picture.
• If
SWAP
is pressed during
Freeze mode, the Freeze
function is cancelled and the
inset screen changes over with
the main screen.
Swap/Freeze
FREEZE
SWAP
PIP-CH ' / "
TV/VIDEO
(AV1)
5
(5)
1VA
3 Press
FREEZE
again to cancel Freeze mode.
AV1
(SAV1)
AV3
(SAV3)
TV channels
(AV2)*
AV1
(SAV1)
AV3
(SAV3)
TV
(Current viewing channel)
(AV2)*