User Manual

E 24
ENGLISH
FRANÇAIS
РУССКИЙ
Sound adjustment
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to select “SOUND”.
6 Repeat steps 4 and 5 above to adjust other items.
7 Press
MENU
until normal screen appears.
• Pressing
NORMAL
while a SOUND selection is displayed, only the selected
mode is reset to the standard (factory-setting) position.
• Pressing
NORMAL
while the SOUND menu screen is displayed will reset all
the items of SOUND menu to the standard (factory-setting) position.
• Pressing
NORMAL
will reset all the items of PICTURE menu and SOUND
menu to the standard (factory-setting) position.
3 Press /
to display SOUND menu.
4 Press
CH
/
CH
to select adjustment items.
5 Adjust using /
.
• Wait for approximately five
seconds to return to SOUND
menu.
CH
CH
MENU
NORMAL
M ENU
SOUND
PICTURE
FEATURE
TI
M ER
CH - SE TT I NG
SOUND
SURROUND EPS
BBE ON
EQUAL I ZER
BALANCE 15
AVL ON
SUPER BASS ON
BALANCE 15
25
BALANCE To shift balance To shift balance
toward left toward right
EQUALIZER (Refer with page for details on Equalizer)
SURROUND*
1
(Please see note below)
Selected item Press Press
BBE*
2
The BBE is ON The BBE is OFF
AVL*
2
The AVL is ON The AVL is OFF
SUPER BASS The SUPER BASS is ON The SUPER BASS is OFF
ON OFF
ON OFF
ON OFF
The following table lists the adjustment items shown in the SOUND menu and how they change as you
press / .
•
AVL is advised to be set to "ON" when compact disk (CD) is being playback.
*
1: SURROUND mode can be set to “OFF”, “ESS” or “SRS” during receiving sound signal is stereo.
SURROUND mode can be set to “OFF” or “EPS” during receiving sound signal is monaural.
(SURROUND mode can be set using remote control. See
26
.)
*
2: Please see
56
for details on Definition of Terms.