User Manual

124
SUPPLIED ACCESORIES
- Fitting the batteries-
23
TYPICAL CONNECTIONS
TYPICAL CONNECTIONS (Continued)
Mains Socket Outlet
AC 220~240 V, 50 Hz
Mains Socket Outlet
AC 220~240 V, 50 Hz
AV/TERMINAL
(AV-1)
BACK OF TV
ANT. EXT.2
EXT.1
DVD PLAYER
DECODER
Scart Lead
(Not supplied)
Scart Lead
(Not supplied)
AV/TERMINAL
(AV-2)
Aerial IN
Scart Lead
(Not supplied)
Aerial Lead
(Not supplied)
Aerial
(Not supplied)
Aerial INAudio/Video
BACK OF VCR
RF OUT
+
-
+
-
R03 ("AAA" size) Dry Batteries
1. With your thumb
nail, pull up the
slit as shown.
2. Insert the two
batteries as shown.
3. Replace the battery cover.
A SCART lead (not supplied) is recommended for use with this TV, to
obtain the best communication between your TV and VCR, refer
to page 24 of the operation manual.
Check List:
• Is the TV connected to the mains?
• Is the aerial connected to the TV?
TURN TV ON FOR THE FIRST TIME
TV set
Main power button
A.P.S. IS RUNNING
PLEASE WAIT
TV : CANCEL
PROGRAM.
11
12
13
14
15
16
17
18
19
20
----
----
----
----
----
----
----
----
----
----
21 ----
22 ----
23 ----
24 ----
25 ----
26 ----
27 ----
28 ----
29 ----
30 ----
AUTOSTORE
INSERT
DELETE
NAME
01 C 12
02 C 23
03 C 45
04 C 47
05 C 50
06 C 55
07 ----
08
09
10
----
----
----
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
LANGUAGE
COUNTRY
TUNING MODE
START
TV CANCEL:
ENGLISH
UK
CHANNEL
1
2
3
Aerial IN
Back of TV
Aerial
(Not supplied)
Aerial Lead
(Not supplied)
ANT.
EXT.2
EXT.1
Mains Socket Outlet
AC 220~240 V, 50 Hz
Initial Settings
The message “
” will be displayed when you turn on your
TV for the first time.
PLEASE CHECK ANTENNA CABLE AUTO.
PROGRAMMING SYSTEM
1- LANGUAGE
2- COUNTRY
3-
4- START
A.P.S.
A.P.S.
A.P.S. A.P.S. IS RUNNING
PLEASE WAIT A.P.S.
PROGRAM.
A.P.S.
Select with “ ” or “ ” button, then press the
“ ” or “ ” button to select a menu language.
Select with “ ” or “ ” button, then press the
“ ” or “ ” button to select the country you are now located.
Press the “ ” or “ ” buttons to select Tuning Mode. This
allows you to choose how you run the APS. If you select
Channel Tuning Mode, the APS will run through the
channel numbers for your area to locate TV stations. Alternatively
if you select Frequency Tuning Mode APS will run through all
the frequencies to locate TV stations.
Select with “ ” or “ ” button, then press the “ ” button
to start
, (Automatic Programming System) automatically
programmes the received channels in your TV’s
programme numbers. During , “
” will be displayed. After is finalized, the
“ ” menu appears.
To cancel , press the “ ” button.
TV
You can delete a channel, insert a channel into a programme number,
or re-start with the “ ” menu. For details, see
“”on
A.P.S. PROGRAM.
PROGRAM. (Programming) menu page 15 in the Operation
Manual.
Your TV will switch on in two steps:
Press the Main power button ( ) located
on the front of the TV.
To switch on the TV from stand-by mode either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press Power Button and “ ” or “ ” buttons on the TV or on the
remote control respectively, so the TV will switch on and the Led will
turn .
1-
2-
P/CH+ -P/CH
RED
GREEN
This will switch the
TV into Stand-by mode. The LED at the
front of the TV will illuminate red.
R
Please read this operation manual carefully
before using the colour television.
28LF-92H
32LF-92H
COLOUR TELEVISION
OPERATION MANUAL
ANT. EXT.2
EXT.1
ANT. EXT.2
EXT.1
CH S-VIDEO VIDEO L/S/G/I R/D/D/D
AUDIO
R
28LF-92H
32LF-92H
COLOUR TELEVISION
QUICK
START
GUIDE
For easy installation
Using this installation guide
should enable you to set up your
TV in less than 15 minutes---
- - - Refer to your operation
manual for more tips and advice
If problems persist, contact the SHARP Helpline (office hours only) on
tel : [phone] (or(01) 676 0648 if telephoning from Ireland) and/or
WEB-SITE:www.sharp.co.uk/support
• Fitting the batteries into the remote control
• Connecting the aerial cable
• Tuning the TV channels
Aerial connection - TV set only -
Aerial IN
BACK OF TV
Aerial
(Not supplied)
Aerial Lead
(Not supplied)
ANT. EXT.2
EXT.1
Typical Connections 28/32LF-92H
ANT. EXT.2
EXT.1
Connections - TV and VCR -
Aerial
(Not supplied)
Aerial Lead
(Not supplied)
ANT. EXT.2
EXT.1
Aerial Lead
(Not supplied)
Scart Lead
(Not supplied)
BACK OF TV
Aerial IN
BACK OF VCR
Audio/Video
RF OUT
AV/TERMINAL
(AV-1)
Aerial IN
Respect the
environment and
put used batteries
in a container that is
especially designed
for this purpose.
Typical
Connections
Quick Start
Guide
Operation
Manual
Remote
control
Note: For further details, please refer to operation manual of your VCR.