R 28LF-92H 32LF-92H COLOUR TELEVISION OPERATION MANUAL Please read this operation manual carefully before using the colour television.
Contents Dear SHARP Customer ........................................... 2 Safety Precautions .................................................. 3 Supplied Accessories .............................................. 5 Remote Control Buttons ......................................... 6 Control Panel Buttons ............................................. 7 Antenna Connections .............................................. 7 Preparation ............................................................... 8 Teletext .
Dear SHARP Customer Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To ensure proper operation, please read this manual carefully. After reading, keep this manual in a safe place for future reference. TERMS OF GUARANTEE Subject to the conditions listed below Sharp Electronics (U.K.) Ltd.
Safety Precautions This equipment complies with the requirements of Directives 89/336/EEC, 92/31/EEC and 73/23/EEC as amended by 93/ 68/EEC. This receiver should only be operated from a 220-240V AC, 50 Hz outlet. Ensure you select the correct voltage setting for your convenience. Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.
Unplug the power cord from the wall outlet immediately if the TV set begins to make unusual noises or give off smoke or an odd smell, then call your dealer for service. Always disconnect your television from the mains and the aerial cables during thunderstorms. Even if your television is switched off, it can still be damaged by lightning striking the mains and/or aerial cable. Do not leave your TV set in Stand-by or operating mode when you leave the house.
Supplied Accessories 7\SLFDO &RQQHFWLRQV /) + $HULDO FRQQHFWLRQ 79 VHW RQO\ %$ &. 2) 79 /) + $HULDO 1RW VXSSOLHG /) + $ 1 7 ( ; 7 ( ; 7 & 2/285 7(/ (9,6,2 1 $1 7 (;7 48,&. 67$57 *8,'( (;7 $HULDO ,1 $HULDO /HDG 1RW VXSSOLHG HVSHFLDOO\ GHVLJQHG /) + IRU WKLV SXUSRVH )LWWLQJ WKH EDW WHULHV LQWR WKH UHPRWH FRQWURO &RQQHFWLQJ WKH DHULDO FDEOH (;7 /) + 7XQLQJ W KH 79 FKDQQHOV $HULDO 1RW VXSSO
Remote Control Buttons = Stand By = Cursor Up = Cursor Right OK = OK = Info (Program Menu) 0 - 9 = Direct Program -/-- = Double Digit = Wide mode button P/CH+ = Program + + = Volume + = TV / Quit Menu (;7 = EXT button (EXT-1, RGB, EXT-2, F-AV, SVHS) Yellow = Feature Menu Blue = Installation Menu = Hold = Update = Index Page = Reveal = Expand = Mix = Teletext = Time Red = Sound Menu Green = Picture Menu = Mute I-II = Mono/Stereo - Dual I-II = - Volume - P/CH = -Program = Flash back button
Control Panel Buttons &+ 6 9,'( 2 9 ,'( 2 / 6 * , 5 ' ' ' $8',2 &+ 6 9,'(2 9,'(2 / 6 * , 5 ' ' ' $8',2 FRONT PANEL VIDEO Speakers (left + right) AUDIO L (L/S/G/I) = Audio left = Power On / Off = Volume -/+ CH AUDIO R (R/D/D/D) = Audio right = Headphone 3,6 mm Ø = Program -/+ S-VIDEO Antenna Connections -7-
1. With your thumb nail, pull up the slit as indicated by the arrow to remove the battery cover. Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and moderate climates.
Operating with the onset buttons Initial Settings The message PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM will be displayed when you turn on your TV for the first time. $872 352*5$00,1* 6<67(0 (1* /,6+ &28 175< 8. 781,1* 02' ( &+$ 11(/ Programme Selecting: Press CH button to select next programme or CH button to select the previous programme.
Sound Menu To Change Headphone Sound Settings: To change sound settings: When you connect headphones you can change the headphone sound settings by entering the headphone menu. To do this, select headphone using or button then enter headphone menu pressing or button. To enter SOUND menu directly, press the RED button, or Press M button, now you are in main menu. In the main menu, SOUND will be the first selected option. Enter the sound menu pressing or button.
The 5 items below the Mode are available to adjust the sound settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz and 10 kHz. To change the values of 5 frequency options, select one of the options by or button, and then press to increase the value, or to decrease the value. Press button to decrease Brightness. %5,*+71( 66 &21 75$67 &2/2 85 6+$5 31(66 To store the Equalizer settings, press or button on Store option.
Setting Hue (In AV mode only) : Using or button select Hue. Press button to increase Hue level. Press button to decrease Hue level. Hue adjust is functional only when NTSC 3.58/4.43 is applied in AV mode. It does not appear when other colour systems used. When you select ZOOM 14:9, CINEMA or 16:9ZOOM S, you can change the vertical scroll by pressing / . * Auto mode (VPS code): The VPS signal is sent by some broadcasting stations with information of the original size.
Sleep Timer CINEMA (16:9) Adapts the 16:9 broadcast cinema movies to the 16:9 Mode, thereby getting rid of the black borders. The sleep timer is used to turn the TV off after a defined period. Press or button to choose a period of time after selecting this item. The timer can be programmed between Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020, 030, 040, ......... ,120.) If sleep timer is activated, at the end of the selected the time, the TV goes automatically to stand-by mode.
INSTALL. (Installation) Menu You can store a channel manually, or modify the current settings of a channel (for example, fine-tuning a channel). You can also change the colour system. To enter INSTALLATION menu directly, press the BLUE button, or Press M button to display the main menu. Press or button to select INSTALL. item. Then or button to display the INSTALL. menu.
To store the station to the programme number selected, select STORE option using or button and then press or button or press OK button. Now as you had selected the Frequency Search, the tuning mode of the program is stored as Frequency Search Mode. Note : Channel Search Tuning Mode uses a channel table. The channels and stations at the table may vary from table to table and from country to country. Each channel has an exact frequency on the table.
Other Features Sound Mute To cut off the sound from the TV press button. To restore + or the sound press the button again or use the buttons, in this case the volume will start from minimum setting. Stereo / Bilingual If the TV channel you are watching broadcasts in two languages (e.g. Eurosport), you can select the dubbed or the original language, pressing the I-II button.
To Reveal concealed Information Connecting external equipment Pressing button once will reveal answers on a quiz or games page. Pressing swers. button again will conceal the revealed an- To Stop Automatic Page Change The teletext page you have selected may contain more information than can be displayed on one screen, in such cases the page will uptade periodically. Press button to stop the automatic page change. Press played.
Connecting external equipment Before connecting anything Switch off all equipment. Read the manuals provided with the equipments. To select an AV mode Pressing (;7 button on the remote control selects one of AV modes (EXT-1, RGB, EXT-2, F-AV, SVHS) To return to the TV mode, repeatedly press (;7 button. EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART) Video input, Audio L/R inputs and RGB inputs are available. TV broadcast outputs (Video and Audio L/R) are available. EXT.
Typical Connections $HULDO FRQQHFWLRQ 79 VHW RQO\ %$&. 2) 79 $HULDO 1RW VXSSOLHG $17 ( ;7 ( ;7 $17 ( ; 7 ( ; 7 $HULDO /HDG 1RW VXSSOLHG $HULDO ,1 $HULDO &RQQHFWLRQV 79 DQG 9&5 $HULDO ,1 %$&. 2) 79 $17 $HULDO 1RW VXSSOLHG ( ; 7 ( ; 7 $9 7(50,1$/ $9 6FDUW /HDG 1RW VXSSOLHG $HULDO /HDG 1RW VXSSOLHG %$&.
Typical Connections (Continued) &RQQHFWLRQV 79 '9' 3OD\HU '(&2'(5 DQG 9&5 9LGHRUHFRUGHU %$&. 2) 79 '9' 3/$<(5 $ 17 '(&2'(5 ( ; 7 (; 7 6FDUW /HDG 1RW VXSSOLHG $HULDO ,1 $9 7(50,1$/ 6FDUW /HDG $9 1RW VXSSOLHG $9 7(50,1$/ $HULDO $9 1RW VXSSOLHG 6FDUW /HDG 1RW VXSSOLHG $HULDO /HDG 1RW VXSSOLHG %$&.
Typical Connections (Continued) &RQQHFWLRQV 79 '9' 3OD\HU DQG 'LJLWDO 6HW 7RS %R[ %$&.
Typical Connections (Continued) &RQQHFWLRQV 79 '9' 3OD\HU 9&5 DQG 'LJLWDO 6HW 7RS %R[ %$&. 2) 79 '9' 3/$<(5 $ 17 ( ;7 6FDUW /HDG ( ;7 1RW VXSSOLHG $HULDO ,1 $9 7(50,1$/ $9 $17 ( ; 7 ( ; 7 6DWHOOLWH GLVK 1RW VXSSOLHG $HULDO $HULDO /HDG 1RW VXSSOLHG 1RW VXSSOLHG 6FDUW /HDG 1RW VXSSOLHG %$&.
Typical Connections (Continued) &RQQHFWLRQ 79 SRZHU FDEOH WR D a 9 V\VWHP %$&. 2) 79 0DLQV 6RFNHW 2XWOHW $& a 9 +] $ 17 ( ;7 ( ;7 &RQQHFWLRQV 79 DQG 9LGHR FDPHUD %$&. 2) 79 &$0&25'(5 ,1 ,1 287 287 $1 7 ( ;7 ( ;7 $XGLR 9LGHR OHDG 1RW VXSSOLHG Note: For further details, please refer to operation manual of your Video Camera. )URQW FRQQHFWLRQV 79 DQG 9LGHR FDPHUD 1RWH )RU IXUWKHU GHWDLOV SOHDVH UHIHU WR RSHUDWLRQ PDQXDO RI \RX
21-pin Euro-SCART and 21-pin Audio/Video REAR TV RF Input 1. Aerial terminal ( ; 7 21-pin In/Out ( ; 7 2. 21-pin Audio/Video (RGB) (EXT.1) With PAL/SECAM/NTSC Video Input 3. 21-pin Audio/Video (EXT.2) With PAL/SECAM/NTSC Video Input 21-pin Euro-SCART with RGB Input (EXT.1) 1. Audio right output 2. Audio right input 3. Audio left output 4. Common earth for audio 5. Earth for blue 6. Audio left input 7. Blue input 8. Audio-video control 9. Earth for green 10. Not used 11. Green input 12.
Troubleshooting If the fault cannot be corrected by using this guide, remove the mains plug from the wall socket and contact the dealer or supplier from whom it was purchased. Where this is not possible, please visit our web-site at www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 [or (01) 676 0648 if telephoning form Ireland] during office hours.
Specifications TV BROADCASTING PAL I/I RECEIVING CHANNELS VHF (BANDI/III) UHF (BAND U) HYPERBAND CABLE-TV Cleaning The Screen Your TV is fitted with a True Flat" picture tube. The surface of the screen is covered with a foil. Under no circumstances may this be damaged. To clean NUMBER OF PRESET CHANNELS 100 Clean the laminated screen with a soft cotton cloth. Only non-alkaline, thinned soapsuds on a basis of water or alkohol be used to moisten the cloth.
Important Instructions For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
R SHARP CORPORATION SHARP ELECTRONICS (U.K.) LTD.
Typical Connections 28/32LF-92H Aerial connection - TV set only BACK OF TV Aerial (Not supplied) ANT. E X T. 2 E X T. 1 ANT. E X T. 2 E X T. 1 Aerial IN Aerial Lead (Not supplied) Connections - TV and VCR Aerial IN ANT. BACK OF TV E X T. 2 Aerial (Not supplied) E X T. 1 AV/TERMINAL (AV-1) Scart Lead (Not supplied) Aerial Lead (Not supplied) BACK OF VCR RF OUT Audio/Video Note: Aerial IN For further details, please refer to operation manual of your VCR.
Connections - TV, DVD Player and Digital Set Top BoxBACK OF TV DVD PLAYER ANT. E X T. 2 E X T. 1 Scart Lead (Not supplied) Aerial IN AV/TERMINAL (AV-2) ANT. E X T. 2 E X T. 1 Satellite dish (Not supplied) Aerial (Not supplied) Scart Lead (Not supplied) Aerial Lead (Not supplied) Aerial Lead (Not supplied) DIGITAL SET TOP BOX RF OUT Note: TV SCART Dish Lead (Not supplied) AERIAL IN DISH IN For further details, please refer to operation manuals of your DVD Player and Digital Set Top Box.
Connections - TV and Video camera BACK OF TV CAMCORDER IN IN OUT OUT ANT. E X T. 2 E X T. 1 Audio/Video lead (Not supplied) Front connections -TV and Video camera- Note: For further details, please refer to operation manual of your Video Camera.
1 2 SUPPLIED ACCESORIES TYPICAL CONNECTIONS (Continued) BACK OF TV R Typical Connections 28/32LF-92H R 28LF-92H 32LF-92H Aerial connection - TV set only BACK OF TV Aerial (Not supplied) ANT. DVD PLAYER 4 Initial Settings The message “PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM” will be displayed when you turn on your TV for the first time. COLOUR TELEVISION E X T. 2 E X T. 1 ANT. QUICK START GUIDE E X T. 2 E X T.
TROUBLESHOOTING If the TV does not respond to the remote control or the buttons at the side of the TV, please turn OFF the TV at the mains and retry. SAFETY WARNINGS R 1 - Select a well-ventilated location. PROBLEMS POSSIBLE CAUSES / REMEDIES 2 - Avoid exposing the TV set to direct sunlight, dust, heat sources, or moisture.
R SHARP CORPORATION SHARP ELECTRONICS (U.K.) LTD.
