Operation Manual

13
■ Manual Channel Preset (PRESET USING FREQUENCY TUNING)
1. Depending on the programme channel you want to preset, press
the Single/Double entry button to select single/double digit
entry.
2. Select the programme channel number you want to preset with
the 0 ~ 9 digit buttons.
3. Press the MENU button  to see the MAIN menu.
4. Press the BLUE button to see the TUNE menu.
5. Press the Volume DOWN/UP buttons / to select (with
white letters) the Channel type: CH (Aerial) or CC (Cable).
6. Press the Channel DOWN button to select SEARCH.
7. Press the Volume DOWN/UP buttons / to start preset.
The tuning sequence will stop when a signal is detected, if the
signal is not the required channel press the Volume DOWN
button or the Volume UP button to continue.
8. Press the GREEN button to memorize.
9. Press the MENU button  to clear the on-screen display.
Repeat the above procedure for presetting other programme channels.
CH
CHANNEL
SEARCH
F-TUNE
MODE
EDIT
AUTO-TUNE MEMORIZE
Pr 06
CH21
SEARCH
GREEN
CHANNEL
SEARCH
F-TUNE
MODE
EDIT
AUTO-TUNE
Pr 06
CH21
CH
CC
TUNE menu
MAIN menu